On Wed, May 11, 2011 at 12:55 AM, Corey Osgood <[email protected]> wrote: > On Tue, May 10, 2011 at 2:10 PM, Vikram Narayanan <[email protected]> wrote: >> Hi, >> >> I am using a DELL laptop. The superio used is >> "Found Nuvoton WPCE775x / NPCE781x (id=0x03, rev=0x06) at 0x4e". >> >> Now the thing is there are no serial ports exposed outside in my laptop. >> Is there any other way out to see the debug messages of coreboot.(If at >> all coreboot supports my motherboard, or if I am planning to try if its >> not there) > > Check lspci -v, you probably have a USB port that has debug port > capability. You'll then need a USB debug cable. I have an USB port that has debug capabilities (according to the lspci output) Should I buy the one mentioned in this page http://www.coreboot.org/EHCI_Debug_Port or can I use a normal cable to debug?
- Thanks Vikram -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
