Kerry Sheh ([email protected]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/232
-gerrit commit 2e6a214fe93272b99f7bbb0c6786d8392653f412 Author: Kerry Sheh <[email protected]> Date: Tue Oct 11 17:27:00 2011 +0800 persimmon: complete the sb800 devicetree sb800 cimx entry sb_Before_Pci_Init was called in the device 16.2 enable_dev() function. If the devicetree don't have this device, then sb_Before_Pci_Init will not get called. So the missing sb800 USB3 devicees was add to the mainboard devicetree. Because of no physical usb connector connected to USB3, the USB3 device setting was off. Change-Id: If060ccb43df7fbe88bafc61e9e600a9120575437 Signed-off-by: Kerry Sheh <[email protected]> Signed-off-by: Kerry Sheh <[email protected]> --- src/mainboard/amd/persimmon/devicetree.cb | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/src/mainboard/amd/persimmon/devicetree.cb b/src/mainboard/amd/persimmon/devicetree.cb index 7da2169..b47e6b9 100644 --- a/src/mainboard/amd/persimmon/devicetree.cb +++ b/src/mainboard/amd/persimmon/devicetree.cb @@ -87,6 +87,8 @@ chip northbridge/amd/agesa/family14/root_complex device pci 15.1 off end # PCIe PortB device pci 15.2 off end # PCIe PortC device pci 15.3 off end # PCIe PortD + device pci 16.0 off end # OHCI USB3 + device pci 16.2 off end # EHCI USB3 register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE end #southbridge/amd/cimx/sb800 -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
