hi elisenda, how did you build the seabios? what do you mean by "attached a bootorder file with cbfstool"? the log shows that the payload could not be executed correctly.
Best wishes QingPei Wang Phone: 86+018930528086 On Wed, Nov 2, 2011 at 3:25 AM, Elisenda Cuadros <[email protected]> wrote: > Hello, > > First of all I am new to the list. Congratulations to all developers for > this great work. > > I have an Epia M-II and I want to install coreboot on it. This board is > supported, great news!. > > I extracted the vga rom with bios_extract (CLE1622A.rom) and I put it > inside menuconfig (pci 1106,3122). > > I built Seabios with Coreboot and attached a bootorder file with cbfstool. > > When I try boot the board with the resulting rom it seems like it´s in a > loop. The VGA output is not good. I am not able to view any payload > messages. > > I am using coreboot v4 from git. > > Because of it is my first experience with coreboot I don´t have any ideas > for what is causing of the problem. I attach you it if you want to take a > look. > > Thanks in advance. > > Best regards, > > Elisenda > > > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
