I was looking at the devicetree.cb values for the alix2 versus what I see on my
alix6:
root@OpenWrt:/# rdmsr 0x51400025
1002
root@OpenWrt:/# rdmsr 0x5140004e
effd00c0
root@OpenWrt:/#
I'm not sure how significant these differences are:
chip northbridge/amd/lx
device pci_domain 0 on
device pci 1.0 on end
device pci 1.1 on end
chip southbridge/amd/cs5536
# IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
# SIRQ Mode = Active(Quiet) mode. Save power....
# Invert mask = IRQ 12 and 1 are active high. Keyboard
and Mouse IRQs. OK
# How to get these? Boot linux and do this:
# rdmsr 0x51400025
register "lpc_serirq_enable" = "0x00001002"
# rdmsr 0x5140004e -- polairy is high 16 bits of low 32
bits
register "lpc_serirq_polarity" = "0x0000EFFD"
# mode is high 10 bits (determined from code)
register "lpc_serirq_mode" = "1"
# Don't yet know how to find this.
register "enable_gpio_int_route" = "0x0D0C0700"
register "enable_ide_nand_flash" = "0" # 0:ide mode,
1:flash
register "enable_USBP4_device" = "0" #0: host,
1:device
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
