Stefan Reinauer ([email protected]) just uploaded a new patch set to 
gerrit, which you can find at http://review.coreboot.org/692

-gerrit

commit cb562dff51087dabab2e1ccebc85ef2cacb99b5a
Author: Stefan Reinauer <[email protected]>
Date:   Tue May 10 12:54:56 2011 -0700

    OXPCIe: Reinitialize UART after pci_dev_set_resources()
    ... and only pull in early init code if the OXPCIe is used for console.
    
    Change-Id: I01feca3b9e8376a75c17554ba1bd200d523dff8d
    Signed-off-by: Stefan Reinauer <[email protected]>
---
 src/drivers/oxford/oxpcie/Makefile.inc |    2 ++
 src/drivers/oxford/oxpcie/oxpcie.c     |   14 ++++++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/src/drivers/oxford/oxpcie/Makefile.inc 
b/src/drivers/oxford/oxpcie/Makefile.inc
index 7d3a26f..7f4aa58 100644
--- a/src/drivers/oxford/oxpcie/Makefile.inc
+++ b/src/drivers/oxford/oxpcie/Makefile.inc
@@ -1,3 +1,5 @@
 driver-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie.c
 
+ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y)
 romstage-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie_early.c
+endif
diff --git a/src/drivers/oxford/oxpcie/oxpcie.c 
b/src/drivers/oxford/oxpcie/oxpcie.c
index e1fb65f..8afdd1f 100644
--- a/src/drivers/oxford/oxpcie/oxpcie.c
+++ b/src/drivers/oxford/oxpcie/oxpcie.c
@@ -23,7 +23,6 @@
 #include <device/pci_ids.h>
 #include <console/console.h>
 #include <arch/io.h>
-#include <uart8250.h>
 
 static void oxford_oxpcie_enable(device_t dev)
 {
@@ -41,9 +40,20 @@ static void oxford_oxpcie_enable(device_t dev)
                        (read32(res->base + 4) & 3));
 }
 
+
+static void oxford_oxpcie_set_resources(struct device *dev)
+{
+       pci_dev_set_resources(dev);
+
+#if CONFIG_CONSOLE_SERIAL8250MEM
+       /* Re-initialize OXPCIe base address after set_resources */
+       uartmem_init();
+#endif
+}
+
 static struct device_operations oxford_oxpcie_ops = {
        .read_resources   = pci_dev_read_resources,
-       .set_resources    = pci_dev_set_resources,
+       .set_resources    = oxford_oxpcie_set_resources,
        .enable_resources = pci_dev_enable_resources,
        .init             = oxford_oxpcie_enable,
        .scan_bus         = 0,

-- 
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to