Hi Julian, On Thu, Mar 22, 2012 at 4:19 PM, Julian Shulika <[email protected]> wrote: > With two cpus > > coreboot-4.0-2135-gccee625-dirty Thu Mar 22 20:39:08 EDT 2012 starting... > > *sysinfo range: [000cf000,000cf730] > bsp_apicid=00 > Enabling routing table for node 00 done. > Enabling SMP settings > (0,1) link=02 > (1,0) link=01 > setup_remote_node: done > Renaming current temporary node to 01 done. > Enabling routing table for node 01 >
This will take some debug effort on your part. The K8 coreboot code is fairly old and doesn't have a anyone doing a lot of maintenance on it. You will need to add debug information to the source to narrow down the problems. Marc > > 2012/3/22 Julian Shulika <[email protected]> >> >> Hi. Motherboard Asus L1N64 with Dual Socket 1207 and switched >> mcp55,ite8716f,amd k8 cpus >> I have log from serial,that's all. >> >> coreboot-4.0-2135-gccee625-dirty Thu Mar 22 19:21:00 EDT 2012 starting... >> *sysinfo range: [000cf000,000cf730] >> bsp_apicid=00 >> Enabling routing table for node 00 done. >> Enabling SMP settings >> 01 nodes initialized. >> Enabling UP settings >> coherent_ht_finalize >> done >> core0 started: >> >> I attached files from lspci,flashrom,superiotool and /proc/gpio >> /proc/ioports >> > > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot -- http://se-eng.com -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
