On Sun, May 27, 2012 at 5:30 PM, Joao Bonina <[email protected]> wrote: > > > Hello Paul, > > > sorry about that. > > I'm attaching the serial console debug, as well as the dmesg output. > > I'm using coreboot v4.0-2408-gad422c0 > > SeaBIOS is version -20120527_232947-debian (as outputted by SeaBIOS build). > > Distribution is Debian Squeeze, and kernel version is 2.6.38-bpo.2-486. > > Thanks in advance! > > > > > ----- Original Message ----- > From: Paul Menzel <[email protected]> > To: Joao Bonina <[email protected]> > Cc: [email protected] > Sent: Sunday, 27 May 2012, 13:34 > Subject: Re: [coreboot] No parallel port set up on Alix 1D board > > Dear Joao, > > > at first, could you in the future please just send plain text messages > to the list [1][2]? That would be awesome. > > Am Sonntag, den 27.05.2012, 04:55 -0700 schrieb Joao Bonina: > >> I just started using coreboot with SeaBIOS as payload on an Alix 1D >> board and began testing functionality. >> >> I noticed that the parallel port isn't working (the /dev/parport0 >> isn't created), and parallel port support is selected in coreboot's >> config. >> >> Anyone have any clues or hints? > > Unfortunately you do not provide enough information for developers to > help you. Please tell them the coreboot version, the SeaBIOS version, > the distribution and so and on. > > Also please attach coreboot’s debugging output and the Linux kernel > messages. > > > Thanks, > > Paul > > > [1] http://en.opensuse.org/openSUSE:Mailing_list_netiquette > [2] http://mailformat.dan.info/config/yahoo.html > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot
The error is in your log: PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] size 0x00000008 gran 0x03 io PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] size 0x00000001 gran 0x00 irq ERROR: PNP: 002e.1 74 drq size: 0x0000000001 not assigned You'll need to see what is going on in the SIO code for that device. The setting is done in the mainboard devicetree.cb. Marc -- http://se-eng.com -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
