Hi Steve, Makes no [substantive] difference. All that does is cause 4 extra lines to be added to the console output:
. . . sb800_enable() PCI: Static device PCI: 00:15.0 not found, disabling it. sb800_enable() PCI: Static device PCI: 00:15.1 not found, disabling it. sb800_enable() PCI: Static device PCI: 00:15.2 not found, disabling it. sb800_enable() PCI: Static device PCI: 00:15.3 not found, disabling it. . . . On Thu, Jun 7, 2012 at 2:54 PM, Steve Goodrich <[email protected]>wrote: > ARG…. Thanks, Outlook. :P**** > > ** ** > > Andy,**** > > ** ** > > Check the devicetree.cb file in your …/src/mainboard/amd/persimmon > folder. Mine shows:**** > > ** ** > > device pci 15.0 off end # PCIe PortA**** > > device pci 15.1 off end # PCIe PortB**** > > device pci 15.2 off end # PCIe PortC**** > > device pci 15.3 off end # PCIe PortD**** > > ** ** > > I’m not 100% certain, but I suspect that changing these from “off” to “on” > will enable the devices. Try the change and see if the console output > starts reflecting the devices you’re looking for.**** > > ** ** > > -- Steve G.**** > > ** ** > > ** ** > > ** ** > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *Andy Sharp > *Sent:* Thursday, June 07, 2012 2:31 PM > *To:* [email protected] > *Subject:* [coreboot] PCIe devices not enabled on amd/persimmon**** > > ** ** > > Howdy,**** > > ** ** > > I've got an AMD/persimmon board, with the agesa family 14 northbridge on > the CPU, and the SB800 southbridge. Both have 4 PCIe ports on them, but > coreboot isn't enabling or enumerating any of the PCIe devices on the > SB800. Does anyone have any ideas for me? The two devices on that > southbridge are an NEC USB3 and a Mini-PCIe slot.**** > > ** ** > > ** ** > > Pasting the console output below for those interested:**** > > ** ** > > ** ** > > coreboot-persimmon1-278-gbbca20f-dirty Wed May 23 12:48:37 PDT 2012 > starting...**** > > POST: 0x34**** > > BSP Family_Model: 00500f20 **** > > cpu_init_detectedx = 00000000 **** > > POST: 0x35**** > > agesawrapper_amdinitmmio passed.**** > > POST: 0x37**** > > agesawrapper_amdinitreset passed.**** > > POST: 0x39**** > > agesawrapper_amdinitearly POST: 0x34**** > > BSP Family_Model: 00500f20 **** > > cpu_init_detectedx = 00000001 **** > > POST: 0x35**** > > agesawrapper_amdinitmmio passed.**** > > POST: 0x37**** > > agesawrapper_amdinitreset passed.**** > > POST: 0x39**** > > agesawrapper_amdinitearly passed.**** > > SLP_TYP type was 0**** > > POST: 0x40**** > > agesawrapper_amdinitpost **** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > ** ** > > EventLog: EventClass = 2, EventInfo = 8040100.**** > > Param1 = a00a, Param2 = 0.**** > > Param3 = 0, Param4 = 0.**** > > SLP_TYP type was 0**** > > error level: 4 **** > > POST: 0x42**** > > agesawrapper_amdinitenv SLP_TYP type was 0**** > > BiosAllocateBuffer BiosHeapBaseAddr: 10000**** > > SLP_TYP type was 0**** > > SLP_TYP type was 0**** > > BiosAllocateBuffer BiosHeapBaseAddr: 10000**** > > SLP_TYP type was 0**** > > BiosAllocateBuffer BiosHeapBaseAddr: 10000**** > > SLP_TYP type was 0**** > > SLP_TYP type was 0 > > SLP_TYP type was 0**** > > passed.**** > > POST: 0x43**** > > POST: 0x44**** > > POST: 0x50**** > > Loading image.**** > > CBFS: Looking for 'fallback/coreboot_ram'**** > > CBFS: found.**** > > CBFS: loading stage fallback/coreboot_ram @ 0x200000 (1441792 bytes), > entry @ 0x200000**** > > Jumping to image.**** > > POST: 0x80**** > > POST: 0x39**** > > coreboot-persimmon1-278-gbbca20f-dirty Wed May 23 12:48:37 PDT 2012 > booting...**** > > POST: 0x40**** > > Enumerating buses...**** > > Show all devs...Before device enumeration.**** > > Root Device: enabled 1**** > > APIC_CLUSTER: 0: enabled 1**** > > APIC: 00: enabled 1**** > > PCI_DOMAIN: 0000: enabled 1**** > > PCI: 00:00.0: enabled 1**** > > PCI: 00:01.0: enabled 1**** > > PCI: 00:01.1: enabled 1**** > > PCI: 00:04.0: enabled 1**** > > PCI: 00:05.0: enabled 0**** > > PCI: 00:06.0: enabled 0**** > > PCI: 00:07.0: enabled 0**** > > PCI: 00:08.0: enabled 0**** > > PCI: 00:11.0: enabled 1**** > > PCI: 00:12.0: enabled 1**** > > PCI: 00:12.1: enabled 1**** > > PCI: 00:12.2: enabled 1**** > > PCI: 00:13.0: enabled 1**** > > PCI: 00:13.1: enabled 1**** > > PCI: 00:13.2: enabled 1**** > > PCI: 00:14.0: enabled 1**** > > I2C: 00:50: enabled 1**** > > I2C: 00:51: enabled 1**** > > PCI: 00:14.1: enabled 1**** > > PCI: 00:14.2: enabled 1**** > > PCI: 00:14.3: enabled 1**** > > PNP: 004e.0: enabled 0**** > > PNP: 004e.3: enabled 0**** > > PNP: 004e.4: enabled 0**** > > PNP: 004e.5: enabled 1**** > > PNP: 004e.6: enabled 0**** > > PNP: 004e.a: enabled 0**** > > PNP: 004e.10: enabled 1**** > > PNP: 004e.11: enabled 0**** > > PCI: 00:14.4: enabled 1**** > > PCI: 00:14.5: enabled 1**** > > PCI: 00:15.0: enabled 0**** > > PCI: 00:15.1: enabled 0**** > > PCI: 00:15.2: enabled 0**** > > PCI: 00:15.3: enabled 0**** > > PCI: 00:16.0: enabled 0**** > > PCI: 00:16.2: enabled 0**** > > PCI: 00:18.0: enabled 1**** > > PCI: 00:18.1: enabled 1**** > > PCI: 00:18.2: enabled 1**** > > PCI: 00:18.3: enabled 1**** > > PCI: 00:18.4: enabled 1**** > > PCI: 00:18.5: enabled 1**** > > PCI: 00:18.6: enabled 1**** > > PCI: 00:18.7: enabled 1**** > > Compare with tree...**** > > Root Device: enabled 1**** > > APIC_CLUSTER: 0: enabled 1**** > > APIC: 00: enabled 1**** > > PCI_DOMAIN: 0000: enabled 1**** > > PCI: 00:00.0: enabled 1**** > > PCI: 00:01.0: enabled 1**** > > PCI: 00:01.1: enabled 1**** > > PCI: 00:04.0: enabled 1**** > > PCI: 00:05.0: enabled 0**** > > PCI: 00:06.0: enabled 0**** > > PCI: 00:07.0: enabled 0**** > > PCI: 00:08.0: enabled 0**** > > PCI: 00:11.0: enabled 1**** > > PCI: 00:12.0: enabled 1**** > > PCI: 00:12.1: enabled 1**** > > PCI: 00:12.2: enabled 1**** > > PCI: 00:13.0: enabled 1**** > > PCI: 00:13.1: enabled 1**** > > PCI: 00:13.2: enabled 1**** > > PCI: 00:14.0: enabled 1**** > > I2C: 00:50: enabled 1**** > > I2C: 00:51: enabled 1**** > > PCI: 00:14.1: enabled 1**** > > PCI: 00:14.2: enabled 1**** > > PCI: 00:14.3: enabled 1**** > > PNP: 004e.0: enabled 0**** > > PNP: 004e.3: enabled 0**** > > PNP: 004e.4: enabled 0**** > > PNP: 004e.5: enabled 1**** > > PNP: 004e.6: enabled 0**** > > PNP: 004e.a: enabled 0**** > > PNP: 004e.10: enabled 1**** > > PNP: 004e.11: enabled 0**** > > PCI: 00:14.4: enabled 1**** > > PCI: 00:14.5: enabled 1**** > > PCI: 00:15.0: enabled 0**** > > PCI: 00:15.1: enabled 0**** > > PCI: 00:15.2: enabled 0**** > > PCI: 00:15.3: enabled 0**** > > PCI: 00:16.0: enabled 0**** > > PCI: 00:16.2: enabled 0**** > > PCI: 00:18.0: enabled 1**** > > PCI: 00:18.1: enabled 1**** > > PCI: 00:18.2: enabled 1**** > > PCI: 00:18.3: enabled 1**** > > PCI: 00:18.4: enabled 1**** > > PCI: 00:18.5: enabled 1**** > > PCI: 00:18.6: enabled 1**** > > PCI: 00:18.7: enabled 1**** > > Mainboard Persimmon Enable.**** > > SLP_TYP type was 0**** > > persimmon_enable, TOP MEM: msr.lo = 0x7f000000, msr.hi = 0x00000000**** > > persimmon_enable, TOP MEM2: msr2.lo = 0x00000000, msr2.hi = 0x00000000**** > > persimmon_enable: uma size 0x18000000, memory start 0x67000000**** > > scan_static_bus for Root Device**** > > APIC_CLUSTER: 0 enabled**** > > PCI_DOMAIN: 0000 enabled**** > > APIC_CLUSTER: 0 scanning...**** > > AP siblings=1**** > > CPU: APIC: 00 enabled**** > > CPU: APIC: 01 enabled**** > > PCI_DOMAIN: 0000 scanning...**** > > PCI: pci_scan_bus for bus 00**** > > POST: 0x24**** > > PCI: 00:00.0 [1022/1510] ops**** > > PCI: 00:00.0 [1022/1510] enabled**** > > PCI: 00:01.0 [1002/9804] enabled**** > > Capability: type 0x01 @ 0x50**** > > Capability: type 0x10 @ 0x58**** > > Capability: type 0x05 @ 0xa0**** > > Capability: type 0x0d @ 0xb0**** > > Capability: type 0x08 @ 0xb8**** > > Capability: type 0x01 @ 0x50**** > > Capability: type 0x10 @ 0x58**** > > PCI: 00:04.0 subordinate bus PCI Express**** > > PCI: 00:04.0 [1022/1512] enabled**** > > sb800_enable() SLP_TYP type was 0**** > > PCI: 00:11.0 [1002/4393] ops**** > > PCI: 00:11.0 [1002/4393] enabled**** > > sb800_enable() PCI: 00:12.0 [1002/4397] ops**** > > PCI: 00:12.0 [1002/4397] enabled**** > > sb800_enable() PCI: Static device PCI: 00:12.1 not found, disabling it.*** > * > > sb800_enable() PCI: 00:12.2 [1002/4396] ops**** > > PCI: 00:12.2 [1002/4396] enabled**** > > sb800_enable() PCI: 00:13.0 [1002/4397] ops**** > > PCI: 00:13.0 [1002/4397] enabled**** > > sb800_enable() PCI: Static device PCI: 00:13.1 not found, disabling it.*** > * > > sb800_enable() PCI: 00:13.2 [1002/4396] ops**** > > PCI: 00:13.2 [1002/4396] enabled**** > > sb800_enable() sm_init().**** > > IOAPIC: Clearing IOAPIC at 0xfec00000**** > > IOAPIC: 23 interrupts**** > > IOAPIC: reg 0x00000000 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000001 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000002 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000003 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000004 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000005 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000006 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000007 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000008 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000009 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000a value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000b value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000c value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000d value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000e value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000f value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000010 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000011 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000012 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000013 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000014 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000015 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000016 value 0x00000000 0x00010000**** > > IOAPIC: Initializing IOAPIC at 0xfec00000**** > > IOAPIC: Bootstrap Processor Local APIC = 0x00**** > > IOAPIC: ID = 0x02**** > > IOAPIC: 23 interrupts**** > > IOAPIC: Enabling interrupts on FSB**** > > IOAPIC: reg 0x00000000 value 0x00000000 0x00000700**** > > IOAPIC: reg 0x00000001 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000002 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000003 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000004 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000005 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000006 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000007 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000008 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000009 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000a value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000b value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000c value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000d value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000e value 0x00000000 0x00010000**** > > IOAPIC: reg 0x0000000f value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000010 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000011 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000012 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000013 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000014 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000015 value 0x00000000 0x00010000**** > > IOAPIC: reg 0x00000016 value 0x00000000 0x00010000**** > > PCI: 00:14.0 [1002/4385] enabled**** > > sb800_enable() PCI: Static device PCI: 00:14.1 not found, disabling it.*** > * > > sb800_enable() hda enabled**** > > PCI: 00:14.2 [1002/4383] ops**** > > PCI: 00:14.2 [1002/4383] enabled**** > > sb800_enable() PCI: 00:14.3 [1002/439d] bus ops**** > > PCI: 00:14.3 [1002/439d] enabled**** > > sb800_enable() PCI: 00:14.4 [1002/4384] bus ops**** > > PCI: 00:14.4 [1002/4384] enabled**** > > sb800_enable() PCI: 00:14.5 [1002/4399] ops**** > > PCI: 00:14.5 [1002/4399] enabled**** > > sb800_enable() sb800_enable() sb800_enable() sb800_enable() sb800_enable() > sb800_enable() PCI: 00:18.0 [1022/1700] enabled**** > > PCI: 00:18.1 [1022/1701] enabled**** > > PCI: 00:18.2 [1022/1702] enabled**** > > PCI: 00:18.3 [1022/1703] enabled**** > > PCI: 00:18.4 [1022/1704] enabled**** > > PCI: 00:18.5 [1022/1718] enabled**** > > PCI: 00:18.6 [1022/1716] enabled**** > > PCI: 00:18.7 [1022/1719] enabled**** > > POST: 0x25**** > > PCI: Left over static devices:**** > > PCI: 00:01.1**** > > PCI: Check your devicetree.cb.**** > > do_pci_scan_bridge for PCI: 00:04.0**** > > PCI: pci_scan_bus for bus 01**** > > POST: 0x24**** > > PCI: 01:00.0 [10ec/8168] enabled**** > > POST: 0x25**** > > PCI: pci_scan_bus returning with max=001**** > > POST: 0x55**** > > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
