the following patch was just integrated into master:
commit 931df3a96bce9e3bc6f0d1058c301c49bee63747
Author: Martin Roth <[email protected]>
Date: Wed Jan 16 17:50:32 2013 -0700
F15tn / Hudson: Change SATA NumOfPorts register setting
The Number of Ports register says that it should be set to the maximum
number of ports supported by the silicon. AGESA was setting this to be
the number of enabled ports. If port 1 was the only port with a drive,
this value got set to 0, indicating 1 port. This causes SeaBIOS to only
look at port 0 and quit, never finding the drive on port 1.
Dave Frodin: I also verified that this patch allows a SATA drive plugged
into port 2 to be detected without a device in port 1.
Change-Id: I5d49e351864449520e3957bbb07edf0f3ec2fd47
Signed-off-by: Martin Roth <[email protected]>
Reviewed-on: http://review.coreboot.org/2165
Reviewed-by: Paul Menzel <[email protected]>
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <[email protected]>
Reviewed-by: Marc Jones <[email protected]>
Build-Tested: build bot (Jenkins) at Thu Jan 17 22:14:24 2013, giving +1
Reviewed-By: Marc Jones <[email protected]> at Fri Jan 18 21:43:56 2013,
giving +2
See http://review.coreboot.org/2165 for details.
-gerrit
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
