David Hendricks ([email protected]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2299
-gerrit commit e8ed3ac0ff76e024a861aec34c85ead47e4c25a4 Author: Hung-Te Lin <[email protected]> Date: Wed Feb 6 21:24:12 2013 +0800 console: Revise serial console configuration names. The console drivers (especially serial drivers) in Kconfig were named in different styles. This change will rename configuration names to a better naming style. - EARLY_CONSOLE: Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE because it also supports non-serial) - CONSOLE_SERIAL: Enable serial output console, from one of the serial drivers. (Renamed from SERIAL_CONSOLE because other non-serial drivers are named as CONSOLE_XXX like CONSOLE_CBMEM) - CONSOLE_SERIAL_UART: Device-specific UART driver. (Renamed from CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped) - HAVE_UART_SPECIAL: A dependency for CONSOLE_SERIAL_UART. Verified to boot on x86/qemu and armv7/snow, and still seeing console messages in romstage for both platforms. Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973 Signed-off-by: Hung-Te Lin <[email protected]> --- src/Kconfig | 4 ++++ src/arch/armv7/lib/romstage_console.c | 6 +++--- src/console/Kconfig | 39 ++++++++++++++++++----------------- src/console/Makefile.inc | 4 ++-- src/console/console.c | 2 +- src/cpu/Kconfig | 2 +- src/cpu/samsung/Kconfig | 5 ++++- src/include/console/console.h | 4 ++-- src/mainboard/google/snow/Kconfig | 5 ++--- src/mainboard/google/snow/bootblock.c | 4 ++-- 10 files changed, 41 insertions(+), 34 deletions(-) diff --git a/src/Kconfig b/src/Kconfig index 92bdf11..32a63d8 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -277,6 +277,10 @@ config HAVE_UART_MEMORY_MAPPED bool default n +config HAVE_UART_SPECIAL + bool + default n + config HAVE_ACPI_RESUME bool default n diff --git a/src/arch/armv7/lib/romstage_console.c b/src/arch/armv7/lib/romstage_console.c index 42a9664..b0ac34e 100644 --- a/src/arch/armv7/lib/romstage_console.c +++ b/src/arch/armv7/lib/romstage_console.c @@ -20,7 +20,7 @@ #include <console/console.h> #include <console/vtxprintf.h> // TODO Unify with x86 (CONFIG_CONSOLE_SERIAL8250) -#if CONFIG_SERIAL_CONSOLE +#if CONFIG_CONSOLE_SERIAL #include <uart.h> #endif #if CONFIG_USBDEBUG @@ -33,7 +33,7 @@ void console_tx_byte(unsigned char byte) if (byte == '\n') console_tx_byte('\r'); -#if CONFIG_SERIAL_CONSOLE +#if CONFIG_CONSOLE_SERIAL_UART uart_tx_byte(byte); #endif #if CONFIG_USBDEBUG @@ -46,7 +46,7 @@ void console_tx_byte(unsigned char byte) static void _console_tx_flush(void) { -#if CONFIG_SERIAL_CONSOLE +#if CONFIG_CONSOLE_SERIAL_UART uart_tx_flush(); #endif #if CONFIG_USBDEBUG diff --git a/src/console/Kconfig b/src/console/Kconfig index b1f41de..e57d568 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -1,20 +1,21 @@ menu "Console" -config SERIAL_CONSOLE - bool "Serial port console output" - default y - help - Send coreboot debug output to a serial port -config EARLY_SERIAL_CONSOLE - bool - depends on SERIAL_CONSOLE +config EARLY_CONSOLE + bool "Enable early (pre-RAM) console output." default n help - Use serial console during early (pre-RAM) boot stages + Use console during early (pre-RAM) boot stages + +config CONSOLE_SERIAL + bool "Serial port console output" + default y + help + Send coreboot debug output to a serial port (should be one or more of + CONSOLE_SERIAL8250, CONSOLE_SERIAL8250MEM, CONSOLE_SERIAL_UART) config CONSOLE_SERIAL8250 bool "Serial port console output (I/O mapped, 8250-compatible)" - depends on SERIAL_CONSOLE + depends on CONSOLE_SERIAL depends on HAVE_UART_IO_MAPPED default y help @@ -22,21 +23,21 @@ config CONSOLE_SERIAL8250 config CONSOLE_SERIAL8250MEM bool "Serial port console output (memory mapped, 8250-compatible)" - depends on SERIAL_CONSOLE + depends on CONSOLE_SERIAL depends on HAVE_UART_MEMORY_MAPPED help Send coreboot debug output to a memory mapped serial port console. -config CONSOLE_SERIAL_NONSTANDARD_MEM - bool "Serial port console output (memory-mapped, device-specific)" - depends on SERIAL_CONSOLE - depends on HAVE_UART_MEMORY_MAPPED +config CONSOLE_SERIAL_UART + bool "Serial port console output (device-specific UART)" + depends on CONSOLE_SERIAL + depends on HAVE_UART_SPECIAL + default y help - Send coreboot debug output to a memory mapped serial port console - on a device-specific UART. + Send coreboot debug output to a device-specific serial port console. choice - prompt "Serial port" + prompt "Serial port for 8250" default CONSOLE_SERIAL_COM1 depends on CONSOLE_SERIAL8250 @@ -72,7 +73,7 @@ config TTYS0_BASE choice prompt "Baud rate" default CONSOLE_SERIAL_115200 - depends on SERIAL_CONSOLE + depends on CONSOLE_SERIAL config CONSOLE_SERIAL_115200 bool "115200" diff --git a/src/console/Makefile.inc b/src/console/Makefile.inc index dd826d6..8e6037a 100644 --- a/src/console/Makefile.inc +++ b/src/console/Makefile.inc @@ -10,13 +10,13 @@ smm-y += vtxprintf.c smm-$(CONFIG_SMM_TSEG) += die.c romstage-y += vtxprintf.c -romstage-$(CONFIG_EARLY_SERIAL_CONSOLE) += console.c +romstage-$(CONFIG_EARLY_CONSOLE) += console.c romstage-y += post.c romstage-y += die.c # TODO Add vtxprintf.c only when early console is required. bootblock-y += vtxprintf.c -bootblock-$(CONFIG_EARLY_SERIAL_CONSOLE) += console.c +bootblock-$(CONFIG_EARLY_CONSOLE) += console.c bootblock-y += die.c ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250_console.c diff --git a/src/console/console.c b/src/console/console.c index 4c47d7f..d4b4b88 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -107,7 +107,7 @@ void console_init(void) enable_usbdebug(CONFIG_USBDEBUG_DEFAULT_PORT); early_usbdebug_init(); #endif -#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM +#if CONFIG_CONSOLE_SERIAL uart_init(); #endif #if CONFIG_DRIVERS_OXFORD_OXPCIE && CONFIG_CONSOLE_SERIAL8250MEM diff --git a/src/cpu/Kconfig b/src/cpu/Kconfig index ddc46cf..c2c3816 100644 --- a/src/cpu/Kconfig +++ b/src/cpu/Kconfig @@ -16,7 +16,7 @@ source src/cpu/x86/Kconfig config CACHE_AS_RAM bool - select EARLY_SERIAL_CONSOLE + select EARLY_CONSOLE default !ROMCC config DCACHE_RAM_BASE diff --git a/src/cpu/samsung/Kconfig b/src/cpu/samsung/Kconfig index abfc049..c905b2a 100644 --- a/src/cpu/samsung/Kconfig +++ b/src/cpu/samsung/Kconfig @@ -5,7 +5,10 @@ config CPU_SAMSUNG_EXYNOS config CPU_SAMSUNG_EXYNOS5 depends on ARCH_ARMV7 select CPU_SAMSUNG_EXYNOS - select EARLY_SERIAL_CONSOLE + select HAVE_UART_SPECIAL + # TODO remove EARLY_CONSOLE when we can run ramstage without early UART + # init. + select EARLY_CONSOLE bool default n diff --git a/src/include/console/console.h b/src/include/console/console.h index 375e5a4..edd49e0 100644 --- a/src/include/console/console.h +++ b/src/include/console/console.h @@ -24,8 +24,8 @@ #include <console/loglevel.h> #include <console/post_codes.h> -#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM -#include <uart8250.h> +#if CONFIG_CONSOLE_SERIAL +#include <uart.h> #endif #if CONFIG_USBDEBUG #include <usbdebug.h> diff --git a/src/mainboard/google/snow/Kconfig b/src/mainboard/google/snow/Kconfig index a0c76d6..bee987d 100644 --- a/src/mainboard/google/snow/Kconfig +++ b/src/mainboard/google/snow/Kconfig @@ -24,7 +24,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy select ARCH_ARMV7 select CPU_SAMSUNG_EXYNOS5 select HAVE_UART_MEMORY_MAPPED - select CONSOLE_SERIAL_NONSTANDARD_MEM # enable serial debugging # select EC_GOOGLE_CHROMEEC select BOARD_ROMSIZE_KB_4096 select DRIVER_MAXIM_MAX77686 @@ -71,7 +70,7 @@ config NR_DRAM_BANKS choice prompt "Serial Console UART" default CONSOLE_SERIAL_UART3 - depends on CONSOLE_SERIAL_NONSTANDARD_MEM + depends on CONSOLE_SERIAL_UART config CONSOLE_SERIAL_UART0 bool "UART0" @@ -97,7 +96,7 @@ endchoice config CONSOLE_SERIAL_UART_ADDRESS hex - depends on CONSOLE_SERIAL_NONSTANDARD_MEM + depends on CONSOLE_SERIAL_UART default 0x12c00000 if CONSOLE_SERIAL_UART0 default 0x12c10000 if CONSOLE_SERIAL_UART1 default 0x12c20000 if CONSOLE_SERIAL_UART2 diff --git a/src/mainboard/google/snow/bootblock.c b/src/mainboard/google/snow/bootblock.c index bcfe440..b57b6c3 100644 --- a/src/mainboard/google/snow/bootblock.c +++ b/src/mainboard/google/snow/bootblock.c @@ -17,7 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#if CONFIG_EARLY_SERIAL_CONSOLE +#if CONFIG_EARLY_CONSOLE #include <types.h> #include <arch/io.h> #include <cbfs.h> @@ -40,7 +40,7 @@ void bootblock_mainboard_init(void) arm_ratios = get_arm_clk_ratios(); system_clock_init(mem, arm_ratios); -#if CONFIG_EARLY_SERIAL_CONSOLE +#if CONFIG_EARLY_CONSOLE exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); uart_init(); printk(BIOS_INFO, "\n\n\n%s: UART initialized\n", __func__); -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
