the following patch was just integrated into master:
commit 31bb2df5086bfde706378b1d80bd53fec69697a2
Author: Hung-Te Lin <[email protected]>
Date: Thu Feb 7 19:30:40 2013 +0800
exynos/snow: Configure UART peripheral during console initialization.
For Exynos platforms, the UART component on pinmux must be first selected
and
configured. This should be done as part of UART console initialization.
Note, that the current implementation hard-codes the device index as UART3,
while the base port can be assigned to different device in Kconfig. This
will be
fixed later.
Verified to work on armv7/snow.
Change-Id: Ie63e76e2dac09fec1132573d1b0027fce55333a1
Signed-off-by: Hung-Te Lin <[email protected]>
Reviewed-on: http://review.coreboot.org/2315
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <[email protected]>
Reviewed-by: David Hendricks <[email protected]>
Build-Tested: build bot (Jenkins) at Thu Feb 7 15:41:36 2013, giving +1
Reviewed-By: David Hendricks <[email protected]> at Fri Feb 8 01:59:42
2013, giving +2
See http://review.coreboot.org/2315 for details.
-gerrit
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
