Stefan Reinauer ([email protected]) just uploaded a new patch set to 
gerrit, which you can find at http://review.coreboot.org/2514

-gerrit

commit a35a2f918c5b9275d31ac61c2e2895dd03af8610
Author: Marc Jones <[email protected]>
Date:   Mon Nov 5 17:25:52 2012 -0700

    Mainboard SMI S state handler was using the wrong defines
    
    The PCH register bit definition for sleep type is a little confusing.
    For example, 7 is S5. To make this simpler for the mainbaord developer,
    the mainboard smi sleep hander is called as mainboard_sleep(slp_typ-2).
    A couple mainboard SMI handlers were using the PCH define for slp_ty,
    so S3 code would be run for S5 and S5 code would never be run.
    
    Change-Id: Iaecf96bfd48cf00153600cd119760364fbdfc29e
    Signed-off-by: Marc Jones <[email protected]>
---
 src/mainboard/intel/emeraldlake2/smihandler.c | 6 +++---
 src/mainboard/samsung/stumpy/smihandler.c     | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/src/mainboard/intel/emeraldlake2/smihandler.c 
b/src/mainboard/intel/emeraldlake2/smihandler.c
index 03c505b..acc1fde 100644
--- a/src/mainboard/intel/emeraldlake2/smihandler.c
+++ b/src/mainboard/intel/emeraldlake2/smihandler.c
@@ -59,11 +59,11 @@ void mainboard_smi_sleep(u8 slp_typ)
        u8 reg8;
 
        switch (slp_typ) {
-       case SLP_TYP_S3:
-       case SLP_TYP_S4:
+       case 3:
+       case 4:
                break;
 
-       case SLP_TYP_S5:
+       case 5:
                /* Turn off LED */
                reg8 = inb(SIO_GPIO_BASE_SET4);
                reg8 |= (1 << 5);
diff --git a/src/mainboard/samsung/stumpy/smihandler.c 
b/src/mainboard/samsung/stumpy/smihandler.c
index 660bb31..5eda0a1 100644
--- a/src/mainboard/samsung/stumpy/smihandler.c
+++ b/src/mainboard/samsung/stumpy/smihandler.c
@@ -62,8 +62,8 @@ void mainboard_smi_sleep(u8 slp_typ)
        u8 reg8;
 
        switch (slp_typ) {
-       case SLP_TYP_S3:
-       case SLP_TYP_S4:
+       case 3:
+       case 4:
                /* Blink LED */
                it8772f_enter_conf();
                it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
@@ -79,7 +79,7 @@ void mainboard_smi_sleep(u8 slp_typ)
                it8772f_exit_conf();
                break;
 
-       case SLP_TYP_S5:
+       case 5:
                /* Turn off LED */
                reg8 = inb(SIO_GPIO_BASE_SET4);
                reg8 |= (1 << 5);

-- 
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to