Hung-Te Lin ([email protected]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2585
-gerrit commit 24adaa2017ee87adc3204affb2f98267d8790183 Author: Ronald G. Minnich <[email protected]> Date: Mon Mar 4 16:39:35 2013 -0800 google/snow: Change MMC0 to work in 8 bit mode. The MMC0 on google/snow can run in 8 bit mode. To simplify driver development, we thought disabling it (using zero, which runs in 1-bit / 4-bit mode) may help. However, after some experiments in payload drivers, setting pinmux to 8 bit mode can still allow MMC to run in 1-bit / 4-bit mode, so it's pretty safe to enable 8 bit mode by default for better performance. Verified to boot on google/snow, and got MMC0 working. Change-Id: Ic0acc723fe6a8aecf373429d3801beadd70815d9 Signed-off-by: Ronald G. Minnich <[email protected]> --- src/mainboard/google/snow/romstage.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/src/mainboard/google/snow/romstage.c b/src/mainboard/google/snow/romstage.c index 7e1cd57..25c0846 100644 --- a/src/mainboard/google/snow/romstage.c +++ b/src/mainboard/google/snow/romstage.c @@ -53,7 +53,7 @@ static int board_wakeup_permitted(void) #endif static void initialize_s5p_mshc(void) { - /* MMC0: Fixed, support 8 bit mode, connected with GPIO. */ + /* MMC0: Fixed, 8 bit mode, connected with GPIO. */ if (clock_set_mshci(PERIPH_ID_SDMMC0)) printk(BIOS_CRIT, "Failed to set clock for SDMMC0.\n"); if (gpio_direction_output(MMC0_GPIO_PIN, 1)) { @@ -61,9 +61,7 @@ static void initialize_s5p_mshc(void) { } gpio_set_pull(MMC0_GPIO_PIN, EXYNOS_GPIO_PULL_NONE); gpio_set_drv(MMC0_GPIO_PIN, EXYNOS_GPIO_DRV_4X); - /* TODO(hungte) Change 0 to PINMUX_FLAG_8BIT_MODE when the s5p_mshc - * driver is ready. */ - exynos_pinmux_config(PERIPH_ID_SDMMC0, 0); + exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); /* MMC2: Removable, 4 bit mode, no GPIO. */ clock_set_mshci(PERIPH_ID_SDMMC2); -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
