On Thu, Mar 07, 2013 at 04:59:43PM +0800, WANG Siyuan wrote: > Hi, > I am trying to boot a hard disk image using coreboot and seabios on > SimNow Simulator. > The system stops at seabios stage. > > PORT_CMD_START fails in function ahci_port_setup (seabios/src/ahci.c), > Then I traced into function ahci_command (seabios/src/ahci.c), I found > the value of register ORT_IRQ_STAT is always 0: > intbits = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); > intbits returns 0 all the time, so system stops here until time out. > > Any comments would be appreciated.
There is a 32 second timeout in that code (which may be a longer wall time if run under a simulator) - are you sure it didn't eventually time out. As to why it is taking so long - could be an error in the simulator or in the seabios driver. You could try disabling the ahci code in seabios via kconfig. -Kevin -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
