calling  i2c_piix4_init+0x0/0x1000 [i2c_piix4] @ 559
         piix4_smbus 0000:00:14.0: SMBus base address index region 0xcd6 
already in use!
         piix4_smbus: probe of 0000:00:14.0 failed with error -16

The I2C driver is paranoid and uses the cd6/cd7 pmio register just to obtain the base addr of the i2c controller. Most likely the cd6/cd7 is claimed in ACPI space.

http://lxr.free-electrons.com/ident?v=2.6.39;i=piix4_setup_sb800

Thanks
Rudolf






The address 0xb00 was used before and this should not have been changed
with the patch above. But it did. I looked through the code but could
not find where 0xcd6 comes from. Any pointers would be very much
appreciated.


Thanks,

Paul


[1] http://review.coreboot.org/2453




--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot

Reply via email to