Hi all,
I am using CONFIG_BOARD_ASUS_F2A85_M_DDR3_VOLT_150
There seems to be a problem in the code logic, Paul should know more. Maybe
playing with the SMBus write and set voltage to 165 might help?
I uncommented the #define IDSOPT_IDS_ENABLED in
src/mainboard/asus/f2a85-m/OptionsIds.h and captured the serial output.
What do you think I should pursue first, option A or B:
Unfortunately I don't know. Hope some AGESA expert will step in.
I'm AFK for the weekend so I can't help more. Have a look to the mainboard
manual, i think dimm labeled A1 is in fact the second channel and not the first
one. Please give a try in other slots too.
Sorry for the short answer, I travel soonish AFK.
Thanks
Rudolf
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
