My current T60 status is "Bricked, in Bucts 1 configuration"
I'm not sure what you did, but if this was you flashchips.c:
> + .model_id = SST_SST25VF016B_T60,
> + .probe = probe_spi_res2,
> + .read = spi_chip_read,
then things were wrong:
Change the .probe field to probe_spi_res1
Change the .model_id field to the RES1 ID given in the datasheet of the
flash chip
Change the .write field to spi_chip_write_1
Tim
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
