Thanks, that is what I am missing.
I have a configuration derived from src/soc/intel/baytrail and didn't
notice the new selections.
Sean
On 05/11/2014 10:52 AM, Furquan Shaikh wrote:
Ah okay!
1) What board are you trying this for? Does it use a different cpu /
soc than the ones for which we have support upstream?
2) The variables ARCH-*-y depend on the config variables ARCH_*_X86_32
selected in cpu/soc specific Kconfig files. E.g.: In file
src/cpu/intel/haswell/Kconfig, the options selected are:
select ARCH_BOOTBLOCK_X86_32
select ARCH_ROMSTAGE_X86_32
select ARCH_RAMSTAGE_X86_32
Make sure that architecture is specified for each of the three stages
i.e. bootblock, romstage and ramstage.
On Sat, May 10, 2014 at 8:18 PM, Sean McNeil <[email protected]
<mailto:[email protected]>> wrote:
The below commit has already been merged and does not resolve the
issue. My /bin/sh is also a symlink to bash.
It appears to be 2 things:
1) I don't have the following definitions anywhere
ARCH-BOOTBLOCK-y := i386
ARCH-ROMSTAGE-y := i386
ARCH-RAMSTAGE-y := i386
this is what causes the command not found problems.
2) target build/cbfs/fallback/bootblock.bin is missing. It looks
the same in the older codebase Makefile.inc and perhaps is a
side-affect of the bootblock class?
On 05/11/2014 01:10 AM, Furquan Shaikh wrote:
This CL has been submitted which should fix the issue:
http://review.coreboot.org/#/c/5701/
On Saturday, May 10, 2014 3:02:44 AM, Sean McNeil
<[email protected] <mailto:[email protected]>> wrote:
Up until recently, compiling coreboot with the options
CONFIG_COMPILER_GCC=y
CONFIG_ANY_TOOLCHAIN=y
on a 64-bit linux system worked just fine. Over the last few
days I now get the errors:
make
Warning: no suitable GCC for armv7.
Warning: no suitable GCC for aarch64.
/bin/sh: -print-libgcc-file-name: command not found
/bin/sh: -print-libgcc-file-name: command not found
/bin/sh: -print-libgcc-file-name: command not found
/bin/sh: -print-libgcc-file-name: command not found
/bin/sh: -print-libgcc-file-name: command not found
/bin/sh: -print-libgcc-file-name: command not found
#
# configuration written to .config
#
make: *** No rule to make target
`build/cbfs/fallback/bootblock.bin', needed by
`build/coreboot.pre1'. Stop.
--
coreboot mailing list: coreboot@
<mailto:[email protected]>coreboot.org
<mailto:[email protected]>
http://
<http://www.coreboot.org/mailman/listinfo/coreboot>www.coreboot.org
<http://www.coreboot.org/mailman/listinfo/coreboot>/mailman/
<http://www.coreboot.org/mailman/listinfo/coreboot>listinfo
<http://www.coreboot.org/mailman/listinfo/coreboot>/coreboot
<http://www.coreboot.org/mailman/listinfo/coreboot>
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
