Dear coreboot folks,
the patch set [1]
hp/abm: Adds the new mainboard
extends `board_info.txt` to include comments about the board [2].
1 +Board name: hp/abm
(I think, the official name belongs into board name.)
2 +Category: customer
3 +ROM protocol: SPI
4 +ROM socketed: n
5 +Flashrom support: y
6 +
7 +The hp/abm board is used in network/server applications.
8 +
9 +Notes:
10 +» 1) The hp/abm board is headless and therefore does not
define
11 +» CONFIG_GFXUMA, and does not require a video bios.
12 +» 2) The micro USB connector on the board edge is
connected to COM4
13 +» (i.e. I/O=2E8h). Coreboot needs to be configured to
use Index=3.
14 +» 3) If you are using SeaBIOS it would also need to be
configured to
15 +» use the UART at I/O=2E8h.
16 +» 3) This board has been tested with headless installed
versions of
17 +» Ubuntu 12.10 and Fedora 19.
Is everyone fine with the used format? Should we use YAML or JSON to
make parsing easier?
Thanks,
Paul
[1] http://review.coreboot.org/5948/
[2] http://review.coreboot.org/#/c/5948/2/src/mainboard/hp/abm/board_info.txt
signature.asc
Description: This is a digitally signed message part
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot

