On 6.7.2014 23:05, ron minnich wrote:
So Rudolf, this just takes the control loop out of the picture and always enables the fan? This stuff always confuses me.
Yes it should. I used the same programming as in orig BIOS but perhaps I missed something. I will check later what went wrong. The change should make it manual mode (which has some non-zero pwm by default, so fan should spin)
Thanks Rudolf
ron On Sun, Jul 6, 2014 at 1:47 PM, Rudolf Marek <[email protected] <mailto:[email protected]>> wrote: Hi I think this is the problem: change the following line in the devicetree.cb register hwm_fan2_ctl_pwm = "0x80" To 0x00 For some reason automatic settings for fan2 does not work... or is badly set up. Idwer: He uses the extra fan, not only the CPU fan. Please let us know if this helps, Thanks Rudolf -- coreboot mailing list: [email protected] <mailto:[email protected]> http://www.coreboot.org/__mailman/listinfo/coreboot <http://www.coreboot.org/mailman/listinfo/coreboot>
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
