Hi guys, thanks for responding. I actually got it to boot DOS now, it was a mismatch device id for the northbridge. Once I change it to match the device, it got through fine. The GFX device id was also wrong so once I change that, video started working too.
Curiously, Intel's document states that the northbridge device id is 0x0F00 and the GFX is 0x0F31, but on my board it's 0x0000 and 0x0031. Wonder if it's a microcode mistake, any ideas? I have 2 boards to test with and apparently they both have this issue. Thanks, Tuan ________________________________________ From: [email protected] [[email protected]] on behalf of Aaron Durbin [[email protected]] Sent: Thursday, July 10, 2014 4:15 PM To: Tuan Vu Cc: [email protected] Subject: Re: [coreboot] BayleyBay FSP booting On Tue, Jul 1, 2014 at 10:55 AM, Tuan Vu <[email protected]> wrote: > I’m trying to investigate Coreboot and FSP booting performance on the > Intel’s Bayley Bay board and having trouble getting it to boot SeaBIOS. I > had to modify some files to get it to the point of attempting to load the > payload but it gets stuck here: > > > > Could not find a bounce buffer... > > Could not load payload > > > > Additional printfk reveals that none of the memory ranges described in > bootmem has the tag LB_MEM_RAM; they all have the LB_MEM_RESERVED, > LB_MEM_TABLE and LB_MEM_UNUSABLE. Any ideas what went wrong here? > Typically, what creates the memory ranges? > Could you provide all the logs? In src/soc/intel/fsp_baytrail/northcluster.c there is a function nc_read_resources() which should add the appropriate resources. See if that is being called. If not, maybe another PCI device id needs to be added to that file to match on the appropriate driver. > > > Thanks, > > > > Tuan Vu > > > > Software Engineer > > Insyde Software, Inc. > > > > > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
