Dear Wen,
Am Freitag, den 11.07.2014, 10:41 -0400 schrieb Wen Wang: > I am experimenting Coreboot on an Intel Rangeley based system using Seabios > (master) as payload. The system does not have VGA adapter. So I added > sgabios. welcome to coreboot! Please note that the official spelling of coreboot is all lowercase. (Also SeaBIOS.) > $ ./build/cbfstool build/coreboot.rom print > > coreboot.rom: 8192 kB, bootblocksize 720, romsize 8388608, offset 0x400000 > > Alignment: 64 bytes > > Name Offset Type Size > > cpu_microcode_blob.bin 0x0 microcode 166976 > > cmos_layout.bin 0x28c80 cmos layout 1164 > > fallback/coreboot_ram 0x29140 stage 41355 > > config 0x33340 raw 3307 > > vgaroms/sgabios.bin 0x34080 raw 4096 > > (empty) 0x350c0 null 44696 > > fallback/romstage 0x3ff80 stage 182967 > > fallback/payload 0x6cac0 payload 58701 > > (empty) 0x7b080 null 3165976 > > FvFsp.bin 0x37ffc0 raw 372736 > > (empty) 0x3db000 null 150760 > > However I don't see Seabios boot menu on console. The system pauses after > Seabios is loaded and then starts OS. There is no problem with Coreboot and > Linux console output, but no output from Seabios is seen at all on the > console. > > .. > > Payload (probably SeaBIOS) loaded into a reserved area in the lower 1MB > > Loading Segment: addr: 0x00000000000e4350 memsz: 0x000000000001bcb0 filesz: > 0x000000000000e50c > > lb: [0x0000000000100000, 0x00000000001a4000) > > Post relocation: addr: 0x00000000000e4350 memsz: 0x000000000001bcb0 filesz: > 0x000000000000e50c > > using LZMA > > [ 0x000e4350, 00100000, 0x00100000) <- ffc6cb30 > > dest 000e4350, end 00100000, bouncebuffer 7fc98000 > > Loaded segments > > Jumping to boot code at fd567 > > entry = 0x000fd567 > > lb_start = 0x00100000 > > lb_size = 0x000a4000 > > adjust = 0x7fc3c000 > > buffer = 0x7fc98000 > > elf_boot_notes = 0x001185b4 > > adjusted_boot_notes = 0x7fd545b4 > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu.. > > Seabios (master) is pulled and automatically built as part of the coreboot > build. During the build, it popped out a menu to for VGA hardware type. > > VGA Hardware Type > > > 1. None (NO_VGABIOS) > 2. GeodeGX2 (VGA_GEODEGX2) > 3. GeodeLX (VGA_GEODELX) > 4. coreboot linear framebuffer (VGA_COREBOOT) (NEW) > > choice[1-4]: > > I tried both 1 and 4. Neither of them seem to work. Did I miss something? I did not spot anything. Could you please attach/paste the whole coreboot and SeaBIOS log? Thanks, Paul PS: Could you please just send plain text messages, that means no HTML, to the list? Big thanks in advance.
signature.asc
Description: This is a digitally signed message part
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
