Paul, I am on an old coreboot branch for this Rangeley/fsp experiment. This branch only has cbmem.py utility. I seem to have issue running the python script on target. I will need to spend some time figuring out the problem or switch to the newer cbmem.c to check cbmem.
Meanwhile, as Wang Fei pointed out, I changed seasbios I/O port base address and I am able to see seabios output using sgabios as option rom. Thanks, Wen -----Original Message----- From: Paul Menzel [mailto:[email protected]] Sent: Monday, July 14, 2014 4:54 PM To: [email protected] Cc: Wen Wang Subject: Re: [coreboot] sgabios no console output from Seabios (was: coreboot Digest, Vol 113, Issue 17) Dear Wen, Am Montag, den 14.07.2014, 11:32 -0400 schrieb Wen Wang: > Thanks for looking into to it! > > I pulled the seabios tree and built seabios manually (.config shown > below). I then loaded seabios/out/bios.bin.elf as coreboot payload and > sgabios as option rom. Unfortunately the same result, no output from > seabios at all. If you build and run the utility `cbmem` as shown below, what is the output of the last two commands? $ cd util/cbmem $ make $ sudo cbmem -l $ sudo cbmem -c Thanks, Paul -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
