Hello On Tue, Oct 28, 2014 at 8:56 PM, Kyösti Mälkki <[email protected]> wrote:
> For the i82801gx part in x60, I am not sure if it will support 16MB SPI > parts as datasheet specifies decode registers for the top 8MB only. > > Or was there already a proof-of-concept it works? > > FWH_DEC_EN1—Firmware Hub Decode Enable Register. > Oops. you may be right. I just picked up 16 MB since it was the largest size SPI would support. For the moment, I guess I will have to restrict the images to 8MB If adding this feature is technically possible, and if you need a development machine, I could put the spare 25Q128F on a motherboard, along with wires to connect that to a Raspberry PI or other for the test. I do have a spare motherboard. Let me know off list if you are interested. You would just need a X60 AC adapter (I can include a barrel power connector for the motherboard if you don't have one) On Tue, Oct 28, 2014 at 11:01 PM, ron minnich <[email protected]> wrote: > Charles, this stuff you're doing is great. Tiny core Linux used to be > a 6 MB .iso so I bet you can get by with 8M! > Thank you :-) I plan to do speed tests for loading the kernel, and to have a minimal "test system" ready. Having a rescue environment right in the flash could be handy (like for when I make mistakes in the grub.cfg) I've played with busybox and uclibc before, I know something very small is possible. But as you say a tiny core linux, PLD or other full-fledged rescue system would be very cool :-) Charles
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
