On 01/10/2015 07:53 AM, Kevin O'Connor wrote:
On Thu, Dec 25, 2014 at 11:45:40AM +0300, Kuzmichev Viktor wrote:
Hello,
I've been trying to boot grub installed on the hard drive using coreboot and
SeaBIOS as a payload. The motherboard I'm using is Intel Mohon Peak. Also, I
do not use VGA for output, only serial port. So, I included the sgabios into
my rom file. Here is its layout:
It should have worked. How did you build SeaBIOS, what SeaBIOS config
did you use, and what changes have you made to SeaBIOS?
-Kevin
As I recall, Mohon Peak uses 0x2f8 for the console serial port. Did you
set sgabios to output to 2f8 instead of 3f8 in sgabios.h?
sgabios.h:#define COM_BASE_ADDR 0x3f8
Martin
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
