Hi all, Has anyone run a Bay Trail SOC in SATA legacy IDE mode? It doesn’t work on my boards, even though I have identical settings of the PCI configuration space as AMI and Phoenix BIOS. The port works, but the IRQs are wrong polarity. Thus when issuing a command, I don’t get an interrupt. If I read the IDE status register (alternate or main) I get an interrupt. As reading the IDE status register, negates interrupt, I get the high level edge as the polarity is inverted.
Can you verify if IDE legacy mode works for Bay Trail with correct? Best regards, B-O Bergman Winzent Technologies -- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
