On Tue, Jan 27, 2015 at 03:59:27PM +0300, Kuzmichev Viktor wrote: > Thank you very much, this helped a lot! Now memtest is loading and it > successfully performs RAM tests. > But there is another issue. Somehow, input via serial console does not work. > And it seems like the problem is not in memtest, rather it's in SeaBIOS or > coreboot. There is no any prompt for input in coreboot. But there is in > SeaBIOS, and I was not able to enter boot menu since it did not respond to > F12. Although, SeaBIOS responds to the keyboard that is directly connected > to the board while memtest does not seem to respond at all (at least, I > tried to hit Esc which should reboot the board). > I've tried to search for this but so far found nothing. > Will appreciate any help.
I'm not sure if you found a solution to your issue. SeaBIOS only supports debug output on serial. For a serial console, one can use sgabios with seabios - there is a description on how one can do this at: http://www.coreboot.org/SeaBIOS#Adding_sgabios_support -Kevin -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot