Dear coreboot folks,
trying to build a normal/fallback image [1] for the Lenovo T60 fails
with the following error.
$ make
fatal: Repository '/src/nvidia-cbootimage.git' existiert nicht.
Klonen von '/src/nvidia-cbootimage.git' in Submodul-Pfad
'util/nvidia/cbootimage' fehlgeschlagen
LINK cbfs/normal/romstage_null.debug
BFD: build/cbfs/normal/romstage_null.debug: warning: Empty loadable
segment detected, is this intentional ?
nm: build/cbfs/normal/romstage_null.offenders: no symbols
OBJCOPY cbfs/normal/romstage_null.elf
OBJCOPY cbfs/normal/romstage_null.bin
GEN generated/romstage.ld
LINK cbfs/normal/romstage.debug
OBJCOPY cbfs/normal/romstage.elf
CBFS coreboot.pre
OBJCOPY cpu/x86/smm/smm_wrap.ramstage.o
CC generated/ramstage.o
CC cbfs/normal/ramstage.debug
OBJCOPY cbfs/normal/ramstage.elf
CBFS coreboot.rom
PAYLOAD payload.elf (compression: LZMA)
SeaBIOS Wait up to 3000 ms for PS/2 keyboard controller
initialization
E: 'etc/ps2-keyboard-spinup' already in ROM image.
Makefile.inc:555: recipe for target 'build/coreboot.rom' failed
make: *** [build/coreboot.rom] Error 1
Any ideas, how to deal with it? Just ignore the error in `Makefile.inc`?
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),)
ifneq ($(CONFIG_SEABIOS_PS2_TIMEOUT),0)
@printf " SeaBIOS Wait up to
$(CONFIG_SEABIOS_PS2_TIMEOUT) ms for PS/2 keyboard controller initialization\n"
$(CBFSTOOL) [email protected] add-int -i $(CONFIG_SEABIOS_PS2_TIMEOUT) -n
etc/ps2-keyboard-spinup
endif
endif
Looking through `Makefile.inc` there might be more places where this
might blow up.
Thanks,
Paul
[1] http://www.coreboot.org/Fallback_mechanism
signature.asc
Description: This is a digitally signed message part
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
