Thanks Marc, Can I use libpayload to make a payload for a 64 bit ROM? I'm following the coreboot minnowboard max 64bit instructions below and substituting the default payload for the payloadlib sample hello world payload.
http://elinux.org/Minnowboard:MinnowMaxCoreboot Also, is there a lower level method than using payloadlib to make a simple coreboot payload elf that just initializes rs232 and prints a string over rs232? Any good low level documentation you would recommend for understanding how a payload needs to initialize rs232 and prints a string? Thanks again! Adam Hi Adam On Sat, Mar 7, 2015 at 5:46 AM Adam Duncan <[email protected]> wrote: > Hi all. I am new to coreboot and just built a default coreboot+seabios ROM > and ran it on a 64bit minnowboard max. Now I'd like to build a simple hello > world payload elf that would simply print a string on rs232. > > Can you recommend the best approach to do this? I was looking at using > libpayload but read in the README that it creates 32 bit elfs. > Libpayload is exactly what you want to use to make a simple hello world. The processor is in 32bit mode and can run 32bit code, if that is your concern. Regards, Marc > Thanks! > Adam > -- > coreboot mailing list: [email protected] > http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
