It looks like the code tries 12MHz by default but can be set to 24MHz which is worth a try.
I think the syntax would just be "-p dediprog:speed=24" -duncan On Tue, Jun 2, 2015 at 11:38 AM, Steve Goodrich <[email protected]> wrote: > I got the Chromium version of flashrom to work, but it takes 20 minutes to > flash/verify the 8 MB device. So, while "working" is far better than "not > working", it is a bit sluggish. :-) > > Any thoughts on speeding it up? > > -- Steve G. > > On Tue, Jun 2, 2015 at 8:57 AM, Steve Goodrich <[email protected]> > wrote: > >> Thanks, Duncan! I'll have a look. >> >> -- Steve G. >> >> On Tue, Jun 2, 2015 at 8:48 AM, Duncan Laurie <[email protected]> >> wrote: >> >>> On Tue, Jun 2, 2015 at 7:39 AM, Steve Goodrich < >>> [email protected]> wrote: >>> >>>> I have a DediProg SF100 programmer that I want to use with flashrom >>>> under Linux. Unfortunately, the SF100 has firmware version 6.5.03 and I >>>> can't use flashrom with it. >>>> >>>> I'm looking for a solution. Does anyone have (or know where/how I can >>>> get): >>>> 1) A version of SF100 firmware that will work with flashrom? >>>> 2) A version of flashrom that will work with SF100 6.5.3? >>>> 3) A Linux tool -- other than flashrom -- that will work with the SF100 >>>> with its current firmware? >>>> >>>> Thanks for any help you can provide! >>>> -- Steve G. >>>> >>>> >>> Hi Steve, >>> >>> There is a patch in the chromium flashrom tree that add support for >>> firmware 6.0+ (which may or may not include 6.5.3) that does not seem to be >>> in the upstream flashrom: >>> >>> https://chromium.googlesource.com/chromiumos/third_party/flashrom/+/543101a06832b4e3a0d89ec9bf81ec398ff5808e >>> >>> I suspect the chromium flashrom tree has diverged enough from upstream >>> that it will not apply cleanly there but it is only a 130 line patch so it >>> shouldn't be too bad to integrate if needed. >>> >>> -duncan >>> >>> >> >
-- coreboot mailing list: [email protected] http://www.coreboot.org/mailman/listinfo/coreboot
