On 2/26/2016 5:48 PM, Julius Werner wrote:
2) I've also seen mention of Servo, but I don't seen any such header on
my board. Looking at a photo of the Acer C720 here, it does look like
there's an oblong space with pads there, but that would be a hell of a
surface mounting job:
https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices/acer-c720-chromebook
Yes, you'll likely not get very far without a serial console, and the
only way to get that is with a soldering iron. The good news is that
you shouldn't need the full Servo header... just the two AP UART lines
is enough (should be pin 16 and 17). You can find the whole Servo
pinout at
https://www.chromium.org/chromium-os/servo/chromium_os_yoshi_flex.tar.gz
thanks to Stefan and Aaron I've got a servo en route and arriving
Monday, hopefully will have some time early next week to get it setup
and start playing with it.
--
coreboot mailing list: [email protected]
http://www.coreboot.org/mailman/listinfo/coreboot
