On Fri, Jun 3, 2016 at 10:35 AM, ron minnich <[email protected]> wrote:
> Given its name (SPD) it sure seems like SPD. > > As to your not being able to address it, a lot of times this can happen if > there is an SMBUS mux on the board and it's not set up on POR so you can > see that device. > It's likely at address 0x50. There's always the 7-bit vs 8-bit designation that confuses people. > > ron > > On Thu, Jun 2, 2016 at 6:53 PM 김유석 <[email protected]> wrote: > >> Dear Sir. >> >> MY EVB is ADI SG-2440. >> >> I was found some eeprom on my evb. >> >> >> This eeprom(CAT24C0EYI-GT3) is store the config of SDRAM. *I gu**ess.* >> >> So, I was search ADDR 0xA0 and procedure of config for sdram from >> coreboot source tree. >> >> But can't found hands on ADDR 0xA0 and found the some structure for >> config of sdram, but not used this strcture. >> >> >> Could you explain to me that "*Role of this eeprom*". >> >> Thank you. >> >> >> >> >> >> -- >> coreboot mailing list: [email protected] >> https://www.coreboot.org/mailman/listinfo/coreboot > > > -- > coreboot mailing list: [email protected] > https://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
