YuSeok, how did you attach the descriptor.bin to your coreboot? Did you follow the previous mail to include descriptor.bin with INCLUDE_ME and ME_PATH in .config?
On Mon, Jun 20, 2016 at 6:46 AM, 김유석 <[email protected]> wrote: > Dear Sir. > > > My ENV > > EVB : ADI SG-2440 > > source : official coreboot > > FSP : intel FSP 4.0 > > > > I was successfully build-up the coreboot and successfully boot-up my EVB. > > > But My EVB's GbE is not activated(not running.) > > > So, I was try to boot using the original OEM bios(from ADI). *This image > is **act**vate the GbE*. > > > Another developer was same quetion to Coreboot communite. And He is > resolved this issue. > > <https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html> > https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html > > > This guy's said that "Must add the descriptor.bin to coreboot.bin". > > > So, I was extract the descriptor.bin from ADI's coreboot.bin > > And successfully attached the descriptor.bin to my coreboot.bin. > > *oem_dumped.bin => ADI's default **coreboot.bin, This image are > activated the GbE.* > > *poplinux@raw bins $ >* ./ifdtool -x src/oem_dumped.bin > File src/oem_dumped.bin is 8388608 bytes > Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff > Flash Region 1 (BIOS): 00010000 - 007fffff > Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused) > Flash Region 3 (GbE): 00fff000 - 00000fff (unused) > Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) > > *poplinux@raw bins $ >* ln -s ./flashregion_0_flashdescriptor.bin > descriptor.bin > *poplinux@raw bins $ >* ./ifdtool -d ./descriptor.bin > File ./descriptor.bin is 65536 bytes > FLMAP0: 0x01040003 > NR: 1 > FRBA: 0x40 > NC: 1 > FCBA: 0x30 > FLMAP1: 0x09100206 > ISL: 0x09 > FPSBA: 0x100 > NM: 2 > FMBA: 0x60 > FLMAP2: 0x00210020 > PSL: 0x2100 > FMSBA: 0x200 > FLUMAP1: 0x000002e0 > Intel ME VSCC Table Length (VTL): 2 > Intel ME VSCC Table Base Address (VTBA): 0x000e00 > > ME VSCC table: > JID0: 0x001740ef > SPI Componend Device ID 1: 0x17 > SPI Componend Device ID 0: 0x40 > SPI Componend Vendor ID: 0xef > VSCC0: 0x20052005 > Lower Erase Opcode: 0x20 > Lower Write Enable on Write Status: 0x50 > Lower Write Status Required: No > Lower Write Granularity: 64 bytes > Lower Block / Sector Erase Size: 4KB > Upper Erase Opcode: 0x20 > Upper Write Enable on Write Status: 0x50 > Upper Write Status Required: No > Upper Write Granularity: 64 bytes > Upper Block / Sector Erase Size: 4KB > > OEM Section: > 00: 31 31 35 32 31 35 30 39 32 30 00 00 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > Found Region Section > FLREG0: 0x000f0000 > Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff > FLREG1: 0x07ff0010 > Flash Region 1 (BIOS): 00010000 - 007fffff > FLREG2: 0x00000fff > Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused) > FLREG3: 0x00000fff > Flash Region 3 (GbE): 00fff000 - 00000fff (unused) > FLREG4: 0x00000fff > Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused) > > Found Component Section > FLCOMP 0x09200024 > Dual Output Fast Read Support: not supported > Read ID/Read Status Clock Frequency: 33MHz > Write/Erase Clock Frequency: 33MHz > Fast Read Clock Frequency: 33MHz > Fast Read Support: not supported > Read Clock Frequency: 20MHz > Component 2 Density: 8MB > Component 1 Density: 8MB > FLILL 0x00000000 > Invalid Instruction 3: 0x00 > Invalid Instruction 2: 0x00 > Invalid Instruction 1: 0x00 > Invalid Instruction 0: 0x00 > FLPB 0x00000000 > Flash Partition Boundary Address: 0x000000 > > Found PCH Strap Section > PCHSTRP0: 0x00080002 > PCHSTRP1: 0x00000000 > PCHSTRP2: 0x00000000 > PCHSTRP3: 0x00000003 > PCHSTRP4: 0x0000007f > PCHSTRP5: 0x007fffc0 > PCHSTRP6: 0x0001c7c0 > PCHSTRP7: 0x00000624 > PCHSTRP8: 0x00000000 > PCHSTRP9: 0xffffffff > PCHSTRP10: 0xffffffff > PCHSTRP11: 0xffffffff > PCHSTRP12: 0xffffffff > PCHSTRP13: 0xffffffff > PCHSTRP14: 0xffffffff > PCHSTRP15: 0xffffffff > PCHSTRP16: 0xffffffff > PCHSTRP17: 0xffffffff > > Found Master Section > FLMSTR1: 0x1f1f0000 (Host CPU/BIOS) > Platform Data Region Write Access: enabled > GbE Region Write Access: enabled > Intel ME Region Write Access: enabled > Host CPU/BIOS Region Write Access: enabled > Flash Descriptor Write Access: enabled > Platform Data Region Read Access: enabled > GbE Region Read Access: enabled > Intel ME Region Read Access: enabled > Host CPU/BIOS Region Read Access: enabled > Flash Descriptor Read Access: enabled > Requester ID: 0x0000 > > FLMSTR2: 0x08090118 (Intel ME) > Platform Data Region Write Access: disabled > GbE Region Write Access: enabled > Intel ME Region Write Access: disabled > Host CPU/BIOS Region Write Access: disabled > Flash Descriptor Write Access: disabled > Platform Data Region Read Access: disabled > GbE Region Read Access: enabled > Intel ME Region Read Access: disabled > Host CPU/BIOS Region Read Access: disabled > Flash Descriptor Read Access: enabled > Requester ID: 0x0118 > > FLMSTR3: 0xffffffff (GbE) > Platform Data Region Write Access: enabled > GbE Region Write Access: enabled > Intel ME Region Write Access: enabled > Host CPU/BIOS Region Write Access: enabled > Flash Descriptor Write Access: enabled > Platform Data Region Read Access: enabled > GbE Region Read Access: enabled > Intel ME Region Read Access: enabled > Host CPU/BIOS Region Read Access: enabled > Flash Descriptor Read Access: enabled > Requester ID: 0xffff > > Found Processor Strap Section > ????: 0xffffffff > ????: 0xffffffff > ????: 0xffffffff > ????: 0xffffffff > > > But GbE is still de-activated. boot log is see below. > > > PCI: pci_scan_bus for bus 00 > PCI: 00:00.0 [8086/0000] ops > PCI: 00:00.0 [8086/1f0e] enabled > Capability: type 0x10 @ 0x40 > Capability: type 0x01 @ 0x80 > Capability: type 0x0d @ 0x88 > Capability: type 0x05 @ 0x90 > Capability: type 0x10 @ 0x40 > PCI: 00:01.0 subordinate bus PCI Express > PCI: 00:01.0 [8086/1f10] enabled > PCI: Static device PCI: 00:02.0 not found, disabling it. > Capability: type 0x10 @ 0x40 > Capability: type 0x01 @ 0x80 > Capability: type 0x0d @ 0x88 > Capability: type 0x05 @ 0x90 > Capability: type 0x10 @ 0x40 > PCI: 00:03.0 subordinate bus PCI Express > PCI: 00:03.0 [8086/1f12] enabled > PCI: Static device PCI: 00:04.0 not found, disabling it. > PCI: 00:0b.0 [8086/1f18] enabled > PCI: 00:0e.0 [8086/1f14] enabled > PCI: 00:0f.0 [8086/1f16] enabled > PCI: 00:13.0 [8086/1f15] enabled > * PCI: Static device PCI: 00:14.0 not found, disabling it.* > * PCI: Static device PCI: 00:14.1 not found, disabling it.* > * PCI: Static device PCI: 00:14.2 not found, disabling it.* > * PCI: Static device PCI: 00:14.3 not found, disabling it*. > > > I don't have a any idea for activate the GbE. > > > Please advise to me. > > Thank you. > > > > > > -- > coreboot mailing list: [email protected] > https://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
