Hi Daniel,
It sounds to me as though the PCI id's of the graphics card for the
upgraded CPU may be different (I could be totally wrong about that, so I
defer to others on the list if I'm barking up the wrong tree) and your
coreboot image may need to be updated accordingly. Of course, it could
also be the video BIOS that's the problem as you've suggested.
Kind Regards,
John.
On 28/06/16 09:24, Daniel Kulesz via coreboot wrote:
Hi folks,
I upgraded the CPU in my F2A-85M from a A4-5300 (Trinity) to a A10-6700
(Richland). The board had Coreboot installed before with the VGA BIOS extracted
from the A4-5300. However, I did not get any video output when trying to boot
after the upgrade, so I replaced the flash chip with a backup with the vendor
BIOS that works.
Is it likely that the A10-6700 needs a different VGA BIOS or does this this
rather look like a different issue? I don't want to experiment too much because
the BIOS chips are hardware-wise pretty fragile (even when using the extractor
tool).
Cheers, Daniel
--
coreboot mailing list: [email protected]
https://www.coreboot.org/mailman/listinfo/coreboot
