For this month I will be bit slow due to GSOC work. Once I will finish it coreboot on BBB will be my first priority :)
On Sun, Jul 31, 2016 at 5:57 PM, Paul Menzel <[email protected]> wrote: > Dear Punit, > > > Am Sonntag, den 31.07.2016, 13:31 +0530 schrieb Punit Vara: >> > On Sun, Jul 31, 2016 at 1:18 PM, punit vara wrote: > To my knowledge, the current support for the BeagleBone is only > minimal, meaning you can receive a message over the serial console and > not more. So all the fun, that means difficult, stuff is still not > implemented. Wow that's the good new for me. I love to solve difficult stuff because it teachs a lot :) > The upside is, that you can look at U-Boot or Barebox and other free > boot loader/firmware, to see what registers need to be set and so on. Thanks for suggestion I will start reading and keep community posted about my progress on this. > So, I am looking forward to your work. Please ask any questions you > have. In root directory I tried $make menuconfig I setup Mainboard vendor (TI) Main Board Model (Beagle bone) Third one is ROM size In BBB EEPROM is 32 KB which contains Board info. That size not available in menu. I am not sure where should I flash this coreboot ? There are three memory in BBB 1. 512MB DDR3L RAM 2. 32 KB EEPROM 3. 4GB EMMC Any clue ? Thanks, Punit Vara -- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
