> + tar zxf tarballs/libelf-0.8.13.tar.gz What about the following command: *$ tar -xf libelf-0.8.13.tar.gz *? ($ uname -a -> Linux localhost.localdomain *4.6.5-300.fc24.x86_64*)
Zoran On Sun, Aug 14, 2016 at 10:12 AM, Ali H. Fardan <r...@firemail.cc> wrote: > Greetings, > > Coreboot is failing to build after running 'make crossgcc' > this error occured when building libreboot too, could any- > one figure it out? Might be that the mirror of libelf is > outdated. > > Raiz > > user@user-ThinkPad-X200:~/Downloads/coreboot$ make crossgcc V=1 > rm -rf doxygen > make -C payloads/coreinfo clean; make -C payloads/nvramcui clean; make > -C payloads/libpayload clean; make -C payloads/external/depthcharge > clean; make -C payloads/external/SeaBIOS clean; make -C > payloads/external/U-Boot clean; make -C payloads/external/Memtest86Plus > clean; make -C payloads/external/iPXE clean; make -C > payloads/external/tint clean; > rm -rf build/*.elf build/*.o .xcompile > rm -f nvramcui.elf > rm -rf doxygen > rm -f build/libpayload.a > rm -f .xcompile > rm -f > rmdir -p 2>/dev/null >/dev/null || true > rm -f .ccwrap junit_config junit_config.old > test -d > /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build > && rm -rf > /home/user/Downloads/coreboot/payloads/external/depthcharge/depthcharge/build > || exit 0 > test -d seabios/out && rm -rf seabios/out || exit 0 > test -d u-boot && make -C u-boot clean || exit 0 > test -d > /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus > && make -C > /home/user/Downloads/coreboot/payloads/external/Memtest86Plus/memtest86plus > clean || exit 0 > test -d ipxe && make -C ipxe/src veryclean || exit 0 > rm -f ipxe/ipxe.rom > test -d tint && make -C tint clean || exit 0 > rm -f build/ramstage?* build/coreboot.romstage build/coreboot.pre* > build/coreboot.bootblock build/coreboot.a > rm -rf build/bootblock?* build/romstage?* build/location.* > rm -f build/option_table.* build/crt0.S build/ldscript > rm -f build/mainboard//static.c build/mainboard//config.py > build/mainboard//static.dot > rm -f build/mainboard//crt0.s build/mainboard//crt0.disasm > rm -f build/mainboard//romstage.inc > rm -f build/mainboard//bootblock.* build/dsdt.* > rm -f build/cpu/x86/smm/smm_bin.c build/cpu/x86/smm/smm.* > build/cpu/x86/smm/smm > rm -rf build .xcompile > make -C util/crossgcc all_without_gdb SKIP_CLANG=1 > make SKIP_GDB=1 build-i386 build-x64 build-arm build-mips \ > build-riscv build-aarch64 build-power8 build-nds32le \ > build_clang build_iasl build_make > bash ./buildgcc -p i386-elf \ > -d /home/user/Downloads/coreboot/ > util/crossgcc/xgcc > Welcome to the coreboot cross toolchain builder v1.42 (August 11th, 2016) > > Target architecture is now i386-elf > Downloading tarballs ... > * gmp-6.1.0.tar.xz (cached) > * mpfr-3.1.4.tar.xz (cached) > * mpc-1.0.3.tar.gz (cached) > * libelf-0.8.13.tar.gz (downloading from http://www.mr511.de/software/l > ibelf-0.8.13.tar.gz) ..100% > * binutils-2.26.1.tar.bz2 (cached) > * gcc-5.3.0.tar.bz2 (cached) > Downloaded tarballs ... ok > Unpacking and patching ... > * libelf-0.8.13.tar.gz > > gzip: stdin: not in gzip format > tar: Child returned status 1 > tar: Error is not recoverable: exiting now > touch: cannot touch 'libelf-0.8.13/.unpack_success': No such file or > directory > make[3]: *** [build_gcc] Error 1 > make[2]: *** [build-i386] Error 2 > make[1]: *** [all_without_gdb] Error 2 > make: *** [crossgcc] Error 2 > > > -- > coreboot mailing list: coreboot@coreboot.org > https://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot