Hi Federico, You guys seem to have successfully built a usable coreboot image for x220. Could you share its revision and config file? I have never built such usable image till now.
Besides, is script file me_cleaner.py downloadable somewhere? Persmule. 在 2016年11月12日 22:41, Federico Amedeo Izzo 写道: > On 11/11/2016 10:16 AM, Persmule wrote: >> Hi everybody, >> After a manual shutdown and repower, the integrated NIC is functional >> again. Has similar phenominon been observed yet? >>> Now my x220 has survived nearly one hour, and the MEI has disappeared from >>> PCI bus, but, additionally, the integrated NIC ceased to be functional with >>> such error seen from dmesg: >>> > Hi Persmule, > Thanks for trying out Nicola's script to clean the ME blob. > > Be careful whenever you try changing ME blob to poweroff completely > the computer, and start again, because apparently if you don't reboot > the ME won't load the new firmware from the flash. > In fact it happened to me that after flashing a non valid ME firmware > on my X201 the computer survived the reboot but became a brick after > shutdown. > > The possibility of replacing the ME blob inside an official (Lenovo or > other) bios is very interesting because it extends also to hardware > not supported by coreboot, and probabily to CPUs newer than Ivy Bridge > (Trammell Hudson tested it on a Skylake mobile CPU > https://www.coreboot.org/pipermail/coreboot/2016-November/082335.html) > > > > > -- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
