Wednesday, December 14, 2016, 10:11:57 AM, you wrote:
| Hi, I am working on a hypvervisor and am using coreboot + FILO as guest BIOS. While things were fine a while back, it has stopped working. I see that my hypervisor can't handle address 0xFFFFFC while coreboot's RIP is at 0xfff81e41. The exact register dump of guest is as follow: [guest0/uart0] (__handle_vm_exception:558) ERROR: No region mapped to guest physical: 0xfffffc GUEST guest0/vcpu0 dump state: RAX: 0x9fe80 RBX: 0xfffff8 RCX: 0x1b RDX: 0x53a11439 R08: 0x0 R09: 0x0 R10: 0x0 R11: 0x0 R12: 0x0 R13: 0x0 R14: 0x0 R15: 0x0 RSP: 0x9fe54 RBP: 0xa0000 RDI: 0xfff801e4 RSI: 0x9fe80 RIP: 0xfff81e41 CR0: 0xe0000011 CR2: 0x0 CR3: 0xa23000 CR4: 0x0 CS : Sel: 0x00000008 Limit: 0xffffffff Base: 0x00000000 (G: 1 DB: 1 L: 0 AVL: 0 P: 1 DPL: 0 S: 1 Type: 11) DS : Sel: 0x00000010 Limit: 0xffffffff Base: 0x00000000 (G: 1 DB: 1 L: 0 AVL: 0 P: 1 DPL: 0 S: 1 Type: 3) ES : Sel: 0x00000010 Limit: 0xffffffff Base: 0x00000000 (G: 1 DB: 1 L: 0 AVL: 0 P: 1 DPL: 0 S: 1 Type: 3) SS : Sel: 0x00000010 Limit: 0xffffffff Base: 0x00000000 (G: 1 DB: 1 L: 0 AVL: 0 P: 1 DPL: 0 S: 1 Type: 3) FS : Sel: 0x00000010 Limit: 0xffffffff Base: 0x00000000 (G: 1 DB: 1 L: 0 AVL: 0 P: 1 DPL: 0 S: 1 Type: 3) GS : Sel: 0x00000010 Limit: 0xffffffff Base: 0x00000000 (G: 1 DB: 1 L: 0 AVL: 0 P: 1 DPL: 0 S: 1 Type: 3) GDT : Sel: 0x00000000 Limit: 0x0000001f Base: 0xfff80200 (G: 0 DB: 0 L: 0 AVL: 0 P: 0 DPL: 0 S: 0 Type: 0) LDT : Sel: 0x00000000 Limit: 0x0000ffff Base: 0x00000000 (G: 0 DB: 0 L: 0 AVL: 0 P: 0 DPL: 0 S: 0 Type: 0) IDT : Sel: 0x00000000 Limit: 0x00000000 Base: 0x00000000 (G: 0 DB: 0 L: 0 AVL: 0 P: 0 DPL: 0 S: 0 Type: 0) TR : Sel: 0x00000000 Limit: 0x0000ffff Base: 0x00000000 (G: 1 DB: 0 L: 1 AVL: 1 P: 0 DPL: 0 S: 0 Type: 0) RFLAGS: 0xa [ ] I want to know which binary file (.o) should I disassemble to look at the RIP? I was looking at objdump -D -mi386 -Maddr16,data16 generated/ramstage.o but this is prior to linking and thus only has offsets. -- Regards [Himanshu Chauhan] |
Check the CBFS map at the end of build and the .elf files (not .o) in the build directory.
--
WBR,
Igor mailto:skochin...@mail.ru
-- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot
