Hi! No, "sensors-detect" founds my SuperIO and needed kernel module is installed in system correctly.
The problem is in "sensors" command. It displays all voltages and pch temperatures correctly, except of PECI temperature from CPU, PECI agent temp is always zero. From: Pierre P [mailto:[email protected]] Sent: Monday, January 23, 2017 6:02 PM To: [email protected]; Аладышев Константин Subject: Re: [coreboot] PECI temperature in lm-sensors Hi, Had a similar issue on a KCMA-D8. When running sensors-detect you have to force probing of i2c chips (default choice is "NO" if you just press enter when asked) then hopefully with one of them it will detect other sensors. Hope this helps Pierre _____ From: coreboot <[email protected]> on behalf of Аладышев Константин <[email protected]> Sent: Monday, January 23, 2017 3:17 PM To: [email protected] Subject: [coreboot] PECI temperature in lm-sensors Does someone have any experience with enabling PECI monitoring on nuvoton SuperIOs ? I'm trying to enable it on board with Haswell+Lynxpoint CPU and NCT6776 SuperIO. But all I see in lm-sensors output for now is zero temperature for PECI Agent. Does coreboot have any SuperIO chips/Intel CPUs/motherboards, that have this functional enabled? What is usually need to be done to enable PECI monitoring? -- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
