Hardware: gigabyte g41m-es2l, coreboot git, seabios-git, native vga
I have the problem that the computer is freezing after few boots. Its hanging
then at every boot in this stage:
....
tWR: 5
tRFC: 35
tWTR: 4
tRRD: 3
tRTP: 4
Channel 0 possiblynot in self refresh
Channel 1 possiblynot in self refresh
Done clk crossing
Done launch
Done timings
DimmA populated onlyin channel 0
No dimms in channel1
Done ODT
Done pre-jedec
MRS...
CH0: Found Rank 0
Nothing happens afterwards.
I replaced the RAM to an other one. Turned it on, it then reset once:
....
tRAS: 18
tRP: 6
tRCD: 6
tWR: 6
tRFC: 51
tWTR: 4
tRRD: 3
tRTP: 4
Reset...
and hangs again at this stage:
...
Done ODT
Done pre-jedec
MRS...
CH0: Found Rank 0
I disconnected the PSU, removed the CMOS battery and wait few minutes. Then it
stops hanging at this stage.
I had this problem also on an other g41m-es2l mainboard with latest libreboot
image installed. So it does not seem to be hardware related and not fixed in
latest coreboot.
Anything i could do to help fixing this bug?
--
coreboot mailing list: [email protected]
https://www.coreboot.org/mailman/listinfo/coreboot
