Hi Again, I tried to find out the details for following error
ata1: SATA link down (SStatus 4 SControl 300) As per status register description SStatus 4 : Phy in offline mode as a result of the interface being disabled or running in a BIST loopback mode Is there any chance that coreboot/grub/Linux is putting SATA in to BIST loopback mode? I am trying to understand who is responsible for SATA Linux status 4 and possible candidates are a) coreboot b) grub c) Linux Looking forward to your expert advice Thanks On Fri, Mar 3, 2017 at 9:29 PM, Gailu Singh <[email protected]> wrote: > Hi Experts, > > I am trying to boot Linux 4.1 with coreboot and grub but SATA drive fails > with error "ata1: SATA link down (SStatus 4 SControl 300)". It is > interesting that GRUB2 can use the SATA drive without issue and able to > load kernel from SATA disk. > > If I use same SATA Drive with Coreboot+UEFI payload then Linux driver just > works fine and I am able to boot linux. > > Any Idea What might be going wrong with Linux Driver. Does it expect > something from BIOS/Coreboot that is not fulfilled > > Linux boot logs: > --------------------- > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > Initializing cgroup subsys cpuacct > Linux version 4.1.21-WR8.0.0.11_standard (vgahlaut@ubuntu) (gcc version > 5.2.0 (Wind River Linux 5.2.0-8.0-intel-apollolake-i-64) ) #1 SMP PREEMPT > Mon Feb 6 18:38:46 PST 2017 > Command line: BOOT_IMAGE=(ahci0,msdos1)/boot/bzImage root=/dev/sda1 > rootdelay=10 console=ttyS2,115200 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > Centaur CentaurHauls > e820: BIOS-provided physical RAM map: > BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 > BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable > BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved > BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable > BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved > BIOS-e820: [mem 0x0000000012151000-0x000000007a64ffff] usable > BIOS-e820: [mem 0x000000007a650000-0x000000007affffff] type 16 > BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved > BIOS-e820: [mem 0x00000000d0000000-0x00000000ffffffff] reserved > BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable > NX (Execute Disable) protection: active > SMBIOS 2.7 present. > e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 > PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC > e820: last_pfn = 0x7a650 max_arch_pfn = 0x400000000 > Scanning 1 areas for low memory corruption > Using GB pages for direct mapping > init_memory_mapping: [mem 0x00000000-0x000fffff] > init_memory_mapping: [mem 0x17fe00000-0x17fffffff] > init_memory_mapping: [mem 0x160000000-0x17fdfffff] > init_memory_mapping: [mem 0x00100000-0x0fffffff] > init_memory_mapping: [mem 0x12151000-0x7a64ffff] > init_memory_mapping: [mem 0x100000000-0x15fffffff] > ACPI: Early table checksum verification disabled > ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) > ACPI: XSDT 0x000000007A6690E0 00005C (v01 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: FACP 0x000000007A66BA60 00010C (v05 CORE COREBOOT 00000000 CORE > 00000001) > ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: > 32/16 (20150410/tbfadt-623) > ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using > default 32 (20150410/tbfadt-704) > ACPI: DSDT 0x000000007A669280 0027D8 (v05 COREv4 COREBOOT 20110725 INTL > 20160831) > ACPI: FACS 0x000000007A669240 000040 > ACPI: FACS 0x000000007A669240 000040 > ACPI: SSDT 0x000000007A66BB70 000774 (v02 CORE COREBOOT 0000002A CORE > 0000002A) > ACPI: MCFG 0x000000007A66C2F0 00003C (v01 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: TCPA 0x000000007A66C330 000032 (v02 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: TPM2 0x000000007A66C370 000034 (v04 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: APIC 0x000000007A66C3B0 00006C (v01 CORE COREBOOT 00000000 CORE > 00000000) > ACPI: HPET 0x000000007A66C420 000038 (v01 CORE COREBOOT 00000000 CORE > 00000000) > Zone ranges: > DMA [mem 0x0000000000001000-0x0000000000ffffff] > DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > Normal [mem 0x0000000100000000-0x000000017fffffff] > Movable zone start for each node > Early memory node ranges > node 0: [mem 0x0000000000001000-0x000000000009ffff] > node 0: [mem 0x0000000000100000-0x000000000fffffff] > node 0: [mem 0x0000000012151000-0x000000007a64ffff] > node 0: [mem 0x0000000100000000-0x000000017fffffff] > Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] > ACPI: PM-Timer IO Port: 0x408 > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x8086a701 base: 0xfed00000 > smpboot: Allowing 4 CPUs, 0 hotplug CPUs > PM: Registered nosave memory: [mem 0x00000000-0x00000fff] > PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] > PM: Registered nosave memory: [mem 0x10000000-0x12150fff] > PM: Registered nosave memory: [mem 0x7a650000-0x7affffff] > PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff] > PM: Registered nosave memory: [mem 0x80000000-0xcfffffff] > PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] > e820: [mem 0x80000000-0xcfffffff] available for PCI devices > clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 1910969940391419 ns > setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 32 pages/cpu @ffff88017fc00000 s93912 r8192 d28968 u524288 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 1001076 > Kernel command line: BOOT_IMAGE=(ahci0,msdos1)/boot/bzImage > root=/dev/sda1 rootdelay=10 console=ttyS2,115200 > PID hash table entries: 4096 (order: 3, 32768 bytes) > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > xsave: enabled xstate_bv 0x1b, cntxt size 0x440 using standard form > Memory: 3909396K/4067960K available (10570K kernel code, 1220K rwdata, > 4084K rodata, 1380K init, 1068K bss, 158564K reserved, 0K cma-reserved) > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > Preemptible hierarchical RCU implementation. > Additional per-CPU info printed with stalls. > NR_IRQS:4352 nr_irqs:1024 16 > Console: colour dummy device 80x25 > console [ttyS2] enabled > clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: > 99544814920 ns > tsc: PIT calibration matches HPET. 1 loops > tsc: Detected 1593.639 MHz processor > Calibrating delay loop (skipped), value calculated using timer frequency.. > 3187.27 BogoMIPS (lpj=1593639) > pid_max: default: 32768 minimum: 301 > ACPI: Core revision 20150410 > ACPI: 2 ACPI AML tables successfully acquired and loaded > Security Framework initialized > Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) > Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) > Initializing cgroup subsys blkio > Initializing cgroup subsys memory > Initializing cgroup subsys devices > Initializing cgroup subsys freezer > Initializing cgroup subsys net_cls > Initializing cgroup subsys debug > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > mce: CPU supports 7 MCE banks > CPU0: Thermal monitoring enabled (TM1) > Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 > Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 > Freeing SMP alternatives memory: 36K (ffffffff8228c000 - ffffffff82295000) > ftrace: allocating 36317 entries in 142 pages > x2apic: IRQ remapping doesn't support X2APIC mode > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > smpboot: CPU0: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (family: 0x6, > model: 0x5c, stepping: 0x9) > Performance Events: PEBS fmt3+, 32-deep LBR, Goldmont events, full-width > counters, Intel PMU driver. > ... version: 4 > ... bit width: 48 > ... generic registers: 4 > ... value mask: 0000ffffffffffff > ... max period: 0000ffffffffffff > ... fixed-purpose events: 3 > ... event mask: 000000070000000f > x86: Booting SMP configuration: > .... node #0, CPUs: #1 #2 #3 > x86: Booted up 1 node, 4 CPUs > smpboot: Total of 4 processors activated (12749.11 BogoMIPS) > devtmpfs: initialized > clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: > 1911260446275000 ns > xor: measuring software checksum speed > prefetch64-sse: 10212.000 MB/sec > generic_sse: 8832.000 MB/sec > xor: using function: prefetch64-sse (10212.000 MB/sec) > pinctrl core: initialized pinctrl subsystem > NET: Registered protocol family 16 > cpuidle: using governor ladder > cpuidle: using governor menu > > failed to register the SPI slaves... > ACPI: bus type PCI registered > PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] > (base 0xe0000000) > PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > PCI: Using configuration type 1 for base access > raid6: sse2x1 gen() 4566 MB/s > raid6: sse2x1 xor() 2697 MB/s > raid6: sse2x2 gen() 4988 MB/s > raid6: sse2x2 xor() 3156 MB/s > raid6: sse2x4 gen() 5699 MB/s > raid6: sse2x4 xor() 2541 MB/s > raid6: using algorithm sse2x4 gen() 5699 MB/s > raid6: .... xor() 2541 MB/s, rmw enabled > raid6: using ssse3x2 recovery algorithm > ACPI: Added _OSI(Module Device) > ACPI: Added _OSI(Processor Device) > ACPI: Added _OSI(3.0 _SCP Extensions) > ACPI: Added _OSI(Processor Aggregator Device) > ACPI: Executed 1 blocks of module-level executable AML code > ACPI: Interpreter enabled > ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" > and report a bug > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments > MSI] > acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [bus 00-ff] > pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] > pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] > pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] > pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] > pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] > pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] > pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] > pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] > pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] > pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] > pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] > pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] > pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] > pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] > pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] > pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] > pci_bus 0000:00: root bus resource [mem 0x7c000000-0x7fffffff window] > pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] > pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] > pci 0000:00:13.0: PCI bridge to [bus 01] > pci 0000:00:13.2: PCI bridge to [bus 02] > pci 0000:00:13.3: PCI bridge to [bus 03] > pci 0000:00:14.0: PCI bridge to [bus 04] > pci 0000:00:14.1: PCI bridge to [bus 05] > pci 0000:02:00.0: Max Payload Size 128, but upstream 0000:00:13.2 set to > 256; if necessary, use "pci=pcie_bus_safe" and report a bug > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. > vgaarb: setting as boot device: PCI:0000:00:02.0 > vgaarb: device added: PCI:0000:00:02.0,decodes=io+ > mem,owns=io+mem,locks=none > vgaarb: loaded > vgaarb: bridge control possible 0000:00:02.0 > SCSI subsystem initialized > ACPI: bus type USB registered > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > pps_core: LinuxPPS API ver. 1 registered > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti < > [email protected]> > PTP clock support registered > EDAC MC: Ver: 3.0.0 > Advanced Linux Sound Architecture Driver Initialized. > PCI: Using ACPI for IRQ routing > Bluetooth: Core ver 2.20 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP socket layer initialized > Bluetooth: SCO socket layer initialized > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 > hpet0: 8 comparators, 64-bit 19.200000 MHz counter > Switched to clocksource hpet > pnp: PnP ACPI init > system 00:00: [mem 0xd0000000-0xdfffffff] could not be reserved > system 00:00: [mem 0xe0000000-0xefffffff] has been reserved > system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved > system 00:01: [io 0x0400-0x04fe] could not be reserved > pnp: PnP ACPI: found 3 devices > clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: > 2085701024 ns > pci 0000:00:13.0: BAR 8: assigned [mem 0x80000000-0x801fffff] > pci 0000:00:13.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] > pci 0000:00:13.2: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref] > pci 0000:00:14.0: BAR 8: assigned [mem 0x80600000-0x807fffff] > pci 0000:00:14.0: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref] > pci 0000:00:14.1: BAR 8: assigned [mem 0x80a00000-0x80bfffff] > pci 0000:00:14.1: BAR 9: assigned [mem 0x80c00000-0x80dfffff 64bit pref] > pci 0000:00:13.0: BAR 7: assigned [io 0x3000-0x3fff] > pci 0000:00:14.0: BAR 7: assigned [io 0x4000-0x4fff] > pci 0000:00:14.1: BAR 7: assigned [io 0x5000-0x5fff] > pci 0000:00:13.0: PCI bridge to [bus 01] > pci 0000:00:13.0: bridge window [io 0x3000-0x3fff] > pci 0000:00:13.0: bridge window [mem 0x80000000-0x801fffff] > pci 0000:00:13.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] > pci 0000:00:13.2: PCI bridge to [bus 02] > pci 0000:00:13.2: bridge window [io 0x1000-0x1fff] > pci 0000:00:13.2: bridge window [mem 0xc1300000-0xc13fffff] > pci 0000:00:13.2: bridge window [mem 0x80400000-0x805fffff 64bit pref] > pci 0000:00:13.3: PCI bridge to [bus 03] > pci 0000:00:14.0: PCI bridge to [bus 04] > pci 0000:00:14.0: bridge window [io 0x4000-0x4fff] > pci 0000:00:14.0: bridge window [mem 0x80600000-0x807fffff] > pci 0000:00:14.0: bridge window [mem 0x80800000-0x809fffff 64bit pref] > pci 0000:00:14.1: PCI bridge to [bus 05] > pci 0000:00:14.1: bridge window [io 0x5000-0x5fff] > pci 0000:00:14.1: bridge window [mem 0x80a00000-0x80bfffff] > pci 0000:00:14.1: bridge window [mem 0x80c00000-0x80dfffff 64bit pref] > NET: Registered protocol family 2 > TCP established hash table entries: 32768 (order: 6, 262144 bytes) > TCP bind hash table entries: 32768 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 32768 bind 32768) > UDP hash table entries: 2048 (order: 4, 65536 bytes) > UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) > NET: Registered protocol family 1 > RPC: Registered named UNIX socket transport module. > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > software IO TLB [mem 0x76650000-0x7a650000] (64MB) mapped at > [ffff880076650000-ffff88007a64ffff] > microcode: CPU0 sig=0x506c9, pf=0x1, revision=0x1c > microcode: CPU1 sig=0x506c9, pf=0x1, revision=0x1c > microcode: CPU2 sig=0x506c9, pf=0x1, revision=0x1c > microcode: CPU3 sig=0x506c9, pf=0x1, revision=0x1c > microcode: Microcode Update Driver: v2.00 <[email protected]>, > Peter Oruba > Scanning for low memory corruption every 60 seconds > Apollo Lake Sideband Interface loading > i2c adapter not found > i2c adapter not found > futex hash table entries: 1024 (order: 4, 65536 bytes) > HugeTLB registered 1 GB page size, pre-allocated 0 pages > HugeTLB registered 2 MB page size, pre-allocated 0 pages > NFS: Registering the id_resolver key type > Key type id_resolver registered > Key type id_legacy registered > aufs 4.1-20150629 > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport 0000:00:13.0: enabling device (0104 -> 0107) > pcieport 0000:00:14.0: enabling device (0104 -> 0107) > pcieport 0000:00:14.1: enabling device (0104 -> 0107) > pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt > pci 0000:02:00.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt > pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt > pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > efifb: probing for efifb > efifb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using > 8128k, total 8128k > efifb: mode is 1920x1080x32, linelength=7680, pages=1 > efifb: scrolling: redraw > efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > Console: switching to colour frame buffer device 240x67 > fb0: EFI VGA frame buffer device > input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS: > 00/PNP0C0C:00/input/input0 > ACPI: Power Button [PWRB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > ACPI: Power Button [PWRF] > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > Linux agpgart interface v0.103 > [drm] Initialized drm 1.1.0 20060810 > [drm] Memory usable by graphics device = 4096M > fb: switching to inteldrmfb from EFI VGA > Console: switching to colour dummy device 80x25 > [drm] Replacing VGA console driver > [drm] RC6 disabled by BIOS > [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [drm] Driver supports precise vblank timestamp query. > i915 0000:00:02.0: Direct firmware load for i915/bxt_dmc_ver1.bin failed > with error -2 > i915 0000:00:02.0: Failed to load DMC firmware [ > https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling > runtime power management. > vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes= > io+mem,decodes=io+mem:owns=io+mem > [drm] failed to retrieve link info, disabling eDP > i915 0000:00:02.0: Direct firmware load for i915/bxt_guc_ver8.bin failed > with error -2 > [drm:intel_guc_ucode_init] *ERROR* Failed to fetch GuC firmware from > i915/bxt_guc_ver8.bin (error -2) > tsc: Refined TSC clocksource calibration: 1593.615 MHz > clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x16f89566daa, > max_idle_ns: 440795280110 ns > [drm] RC6 disabled, disabling runtime PM support > IOTG i915 forklift 2016-03-25 > IOTG i915 build 2016y-05m-16d-15h-25m-52s -0700 (45c9a12) > [drm] Initialized i915 1.6.0 20160314 for 0000:00:02.0 on minor 0 > brd: module loaded > loop: module loaded > sbi_apl starting, bus 0, device d.0 > apl_gpio apl_gpio.1: Failed to attach ACPI GPIO chip > apl_gpio apl_gpio.2: Failed to attach ACPI GPIO chip > apl_gpio apl_gpio.3: Failed to attach ACPI GPIO chip > idma64 idma64.0: Found Intel integrated DMA 64-bit > idma64 idma64.1: Found Intel integrated DMA 64-bit > idma64 idma64.2: Found Intel integrated DMA 64-bit > idma64 idma64.3: Found Intel integrated DMA 64-bit > idma64 idma64.4: Found Intel integrated DMA 64-bit > idma64 idma64.5: Found Intel integrated DMA 64-bit > idma64 idma64.6: Found Intel integrated DMA 64-bit > idma64 idma64.7: Found Intel integrated DMA 64-bit > idma64 idma64.8: Found Intel integrated DMA 64-bit > dw-apb-uart.8: ttyS0 at MMIO 0xc1435000 (irq = 4, base_baud = 115200) is a > 16550A > idma64 idma64.9: Found Intel integrated DMA 64-bit > dw-apb-uart.9: ttyS1 at MMIO 0xc1437000 (irq = 5, base_baud = 115200) is a > 16550A > console [ttyS2] disabled > dw-apb-uart.10: ttyS2 at MMIO 0xc1439000 (irq = 6, base_baud = 114825) is > a 16550A > Switched to clocksource tsc > [drm] RC6 off > [drm:host2guc_action] *ERROR* GuC: host2guc action 0x6 failed. ret=-110 > status=0x00000006 response=0x00000000 > console [ttyS2] enabled > fbcon: inteldrmfb (fb0) is primary device > dw-apb-uart.11: ttyS3 at MMIO 0xc143b000 (irq = 7, base_baud = 115200) is > a 16550A > Console: switching to colour frame buffer device 240x67 > idma64 idma64.12: Found Intel integrated DMA 64-bit > pxa2xx-spi pxa2xx-spi.12: cs2 >= max 2 > pxa2xx-spi pxa2xx-spi.12: can't create new device for spidev > idma64 idma64.13: Found Intel integrated DMA 64-bit > pxa2xx-spi pxa2xx-spi.13: cs2 >= max 2 > pxa2xx-spi pxa2xx-spi.13: can't create new device for spidev > idma64 idma64.14: Found Intel integrated DMA 64-bit > ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA > mode > ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part > deso sadm sds apst > scsi host0: ahci > ata1: SATA max UDMA/133 abar m2048@0xc1449000 port 0xc1449100 irq 372 > igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k > igb: Copyright (c) 2007-2014 Intel Corporation. > pps pps0: new PPS source ptp0 > igb 0000:02:00.0: added PHC on eth0 > igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection > igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 98:4f:ee:13:bb:76 > igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF > igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) > Failed to set pin attr for GSI13 > dwc3-pci 0000:00:15.1: PCI INT B: failed to register GSI > dwc3-pci: probe of 0000:00:15.1 failed with error -1 > xhci_hcd 0000:00:15.0: xHCI Host Controller > xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 > xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks > 0x00009810 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > xhci_hcd 0000:00:15.0: xHCI Host Controller > xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 7 ports detected > usbcore: registered new interface driver usb-storage > i8042: PNP: No PS/2 controller found. Probing ports directly. > i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > ata1: SATA link down (SStatus 4 SControl 300) > i8042: No controller found > mousedev: PS/2 mouse device common for all mice > rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs > i2c /dev entries driver > i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A > i801_smbus 0000:00:1f.1: PCI INT A: no GSI > genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer) > i801_smbus 0000:00:1f.1: Failed to allocate irq 0: -16 > i801_smbus 0000:00:1f.1: SMBus using polling > md: linear personality registered for level -1 > md: raid0 personality registered for level 0 > md: raid1 personality registered for level 1 > md: raid10 personality registered for level 10 > md: multipath personality registered for level -4 > md: faulty personality registered for level -5 > device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: > [email protected] > EDAC pnd2: ECC disabled on channel 0 > EDAC pnd2: Failed to register device with error -22. > Intel P-state driver initializing. > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b) > sdhci-pci 0000:00:1b.0: failed to setup card detect gpio > sdhci-pci 0000:00:1b.0: No vmmc regulator found > sdhci-pci 0000:00:1b.0: No vqmmc regulator found > mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit > sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b) > sdhci-pci 0000:00:1c.0: No vmmc regulator found > sdhci-pci 0000:00:1c.0: No vqmmc regulator found > usb 1-2: new low-speed USB device number 2 using xhci_hcd > mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit > sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b) > sdhci-pci 0000:00:1e.0: No vmmc regulator found > sdhci-pci 0000:00:1e.0: No vqmmc regulator found > mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > mmc1: MAN_BKOPS_EN bit is not set > mmc1: new HS400 MMC card at address 0001 > mmcblk0: mmc1:0001 CGND3R 58.2 GiB > mmcblk0boot0: mmc1:0001 CGND3R partition 1 4.00 MiB > mmcblk0boot1: mmc1:0001 CGND3R partition 2 4.00 MiB > mmcblk0rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB > usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 > microframes > usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 > microframes > input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00: > 15.0/usb1/1-2/1-2:1.0/0003:1C4F:0016.0001/input/input2 > hid-generic 0003:1C4F:0016.0001: input: USB HID v1.10 Keyboard [SIGMACHIP > USB Keyboard] on usb-0000:00:15.0-2/input0 > input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00: > 15.0/usb1/1-2/1-2:1.1/0003:1C4F:0016.0002/input/input3 > hid-generic 0003:1C4F:0016.0002: input: USB HID v1.10 Device [SIGMACHIP > USB Keyboard] on usb-0000:00:15.0-2/input1 > oprofile: using NMI interrupt. > u32 classifier > Actions configured > NET: Registered protocol family 10 > sit: IPv6 over IPv4 tunneling driver > NET: Registered protocol family 17 > l2tp_core: L2TP core driver, V2.0 > l2tp_netlink: L2TP netlink interface > Key type dns_resolver registered > Btrfs loaded > console [netcon0] enabled > netconsole: network logging started > rtc_cmos 00:02: setting system clock to 2017-02-25 20:39:16 UTC > (1488055156) > snd_hda_codec_realtek hdaudioC0D0: ALC662 rev3: SKU not ready 0x00000100 > snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=3 > (0x14/0x16/0x15/0x0/0x0) type:line > snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 > snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 > snd_hda_codec_realtek hdaudioC0D0: inputs: > snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 > snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 > snd_hda_codec_realtek hdaudioC0D0: Line=0x1a > snd_hda_codec_realtek hdaudioC0D0: CD=0x1c > snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec > input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input4 > input: HDA Intel Front Mic as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input5 > input: HDA Intel Line as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input6 > input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input7 > input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input8 > input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input9 > input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input10 > input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00: > 0e.0/sound/card0/input11 > ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: > enum_devices_done OK, num_hid_devices=4 > ALSA device list: > #0: HDA Intel at 0xc1418000 irq 379 > ttyS2 - failed to request DMA > Waiting 10 sec before mounting root device... > md: Waiting for all devices to be available before autodetect > md: If you don't use raid, use raid=noautodetect > md: Autodetecting RAID arrays. > md: Scanned 0 and added 0 devices. > md: autorun ... > md: ... autorun DONE. > VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6 > Please append a correct "root=" boot option; here are the available > partitions: > 0100 4096 ram0 (driver?) > 0101 4096 ram1 (driver?) > 0102 4096 ram2 (driver?) > 0103 4096 ram3 (driver?) > 0104 4096 ram4 (driver?) > 0105 4096 ram5 (driver?) > 0106 4096 ram6 (driver?) > 0107 4096 ram7 (driver?) > 0108 4096 ram8 (driver?) > 0109 4096 ram9 (driver?) > 010a 4096 ram10 (driver?) > 010b 4096 ram11 (driver?) > 010c 4096 ram12 (driver?) > 010d 4096 ram13 (driver?) > 010e 4096 ram14 (driver?) > 010f 4096 ram15 (driver?) > b300 61071360 mmcblk0 driver: mmcblk > b318 4096 mmcblk0rpmb (driver?) > b310 4096 mmcblk0boot1 (driver?) > b308 4096 mmcblk0boot0 (driver?) > VFS: Unable to mount root fs on unknown-block(0,0) > User configuration error - no valid root filesystem found > Kernel panic - not syncing: Invalid configuration from end user prevents > continuing > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.21-WR8.0.0.11_standard #1 > Hardware name: Intel Leafhill/Leafhill, BIOS APOLLOLAKE_CB_MR1_001 > 03/02/2017 > 0000000000000000 ffff88017b12fd28 ffffffff81a4568e ffffffff81eb7630 > 0000000000008001 ffff88017b12fda8 ffffffff81a438fa ffff88017b12fd48 > ffffffff00000008 ffff88017b12fdb8 ffff88017b12fd58 62306b6c62636d6d > Call Trace: > [<ffffffff81a4568e>] dump_stack+0x4f/0x65 > [<ffffffff81a438fa>] panic+0xbb/0x1d1 > [<ffffffff8214b544>] mount_block_root+0x21e/0x235 > [<ffffffff8214b76b>] mount_root+0xf1/0xfc > [<ffffffff811a69a6>] ? SyS_unlink+0x16/0x20 > [<ffffffff8214b8e3>] prepare_namespace+0x16d/0x1a6 > [<ffffffff8214b16f>] kernel_init_freeable+0x200/0x215 > [<ffffffff81a414e0>] ? rest_init+0x90/0x90 > [<ffffffff81a414ee>] kernel_init+0xe/0xf0 > [<ffffffff81a4dea2>] ret_from_fork+0x42/0x70 > [<ffffffff81a414e0>] ? rest_init+0x90/0x90 > Kernel Offset: disabled > ---[ end Kernel panic - not syncing: Invalid configuration from end user > prevents continuing > >
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
