Hi, Thanks for the answer. I saved a backup of the actual rom with the proprietary software which is a Fujitsu utility.
I have tried with flashrom : - With internal programmer I have this error : Reading flash transaction error Read operation failed - With a ch341a spi programmer I have this other error : couldn't open device programmer initialization failed. I have ordered a Rasp. I will try with it. Kory 2017-03-23 18:22 GMT+01:00 Martin Roth <[email protected]>: > Hi Kory, > I'm not sure what the proprietary software is, but you're going to > want to use flashrom or a hardware flash tool instead of the > proprietary software to flash the ROM. > https://www.flashrom.org/Flashrom > > And just since it always needs to be said: > > You need to make sure you have a backup of *YOUR* original ROM before > you flash to coreboot. Do NOT rely on the OEM's ROM file for > recovery, as there may be information specific to your board stored on > your ROM chip. Save this backup, as you may discover you needed > something from it at some later date. Using a hardware solution to > create this backup is the best method because the onboard SPI > controller may not be able to read from the entire chip. > > Updating your board to coreboot has a high chance of bricking your > board. It's recommended that you have a sure way of recovering - Get > a spare ROM chip if the chip is socketed. If it's not, get a hardware > flash solution so you can re-flash the chip even if the board is dead. > The Raspberry-pi or BeagleBone Black are two popular solutions. You > can search for information about how to do this. > > Martin > > > > On Thu, Mar 23, 2017 at 9:25 AM, Kory Maincent <[email protected]> > wrote: > > Hi everyone, > > > > I tried to flash Fujitsu D2990-A1 Board with winbound ROM with coreboot > and > > a coreinfo payload. > > No probleme in compiling and adding the blobs. > > But when I use the proprietary software with FreeDOS to flash the Bios I > > have this error : > > Error - No Board Information found in update file > > > > Is anybody has already seen this error? > > Is it possible to add a special file to the rom with the board > information. > > Or do I have to contact them to solve it because it is a verification > done > > by the software? > > > > I am new to coreboot > > > > Thanks, Kory > > > > -- > > coreboot mailing list: [email protected] > > https://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
