Courtesy Fedora forum... http://www.forums.fedoraforum.org/showthread.php?t=313425
Good Luck! Zoran On Mon, Mar 27, 2017 at 12:38 PM, qma ster <[email protected]> wrote: > Before investigating the software methods, in this situation I would have > tried to: using some great thermal paste, cleaning the dust, and - most > likely - switching to a manual fan control: there are the hardware fan > control adapters, and if you don't have those - temporarily you could just > wire your fan so that it will always work on the max speed instead of > taking the fan control commands from the motherboard > > 2017-03-26 22:35 GMT+03:00 Rudolf Marek <[email protected]>: > >> Hi again, >> >> Sorry, I pasted wrong dump. Before I installed right /etc/sensors3.conf >> >> radeon-pci-0008 >> Adapter: PCI adapter >> temp1: +35.0°C (crit = +120.0°C, hyst = +90.0°C) >> >> it8603-isa-0290 >> Adapter: ISA adapter >> Vcore: +1.27 V (min = +1.12 V, max = +2.96 V) ALARM >> in1: +1.66 V (min = +2.69 V, max = +0.08 V) ALARM >> +12V: +12.38 V (min = +14.98 V, max = +0.00 V) ALARM >> +5V: +5.07 V (min = +3.96 V, max = +0.12 V) ALARM >> in4: +1.20 V (min = +1.92 V, max = +0.12 V) ALARM >> 3VSB: +3.31 V (min = +0.79 V, max = +2.88 V) ALARM >> Vbat: +3.14 V >> +3.3V: +3.36 V >> CPU Fan: 2824 RPM (min = 200 RPM) >> CHA Fan: 0 RPM (min = 600 RPM) ALARM >> CPU Temp: +64.0°C (low = +50.0°C, high = -126.0°C) ALARM sensor = >> thermistor >> M/B Temp: +38.0°C (low = +100.0°C, high = +122.0°C) sensor = >> thermistor >> temp3: -128.0°C (low = -24.0°C, high = +0.0°C) sensor = >> thermistor >> intrusion0: OK >> >> k10temp-pci-00c3 >> Adapter: PCI adapter >> temp1: +48.9°C (high = +70.0°C) >> (crit = +70.0°C, hyst = +69.0°C) >> >> Thanks >> Rudolf >> >> -- >> coreboot mailing list: [email protected] >> https://www.coreboot.org/mailman/listinfo/coreboot >> > > > -- > coreboot mailing list: [email protected] > https://www.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] https://www.coreboot.org/mailman/listinfo/coreboot
