The "s" series are quite finiky when flashing; I flashes recently a T400s, so
I'd assume your laptop also has a WSON8 chip. The pinout and the flashing
procedure is the same; you only need to solder thin wires to the chip - there
is no clip available for them. I'd suggest you also tape the raspberry and the
T430s boards together - if the boards move around, there's a high risk you
will rip the pads from the motheboard/chip.
On April 9, 2017 7:58:35 PM GMT+03:00, kitestramuort
<[email protected]> wrote:
>The T430s is supported by coreboot, however there's very little
>documentation on the flashing procedure itself. I couldn't even
>identify the BIOS chip on the motherboard. From what I've read the chip
>is not SOIC8, unlike those on the non-S T430 and X230, therefore the
>raspberry pi method should not be applicable. Is desoldering the chip
>the only way to install Coreboot on this machine? Is there a
>guide/howto somewhere?
>
>Thanks
>
>--
>coreboot mailing list: [email protected]
>https://mail.coreboot.org/mailman/listinfo/coreboot
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
coreboot mailing list: [email protected]
https://mail.coreboot.org/mailman/listinfo/coreboot
