Will the ethernet controller work? On Sat, 15 Apr 2017 21:55:52 +0800 persmule <[email protected]> wrote:
> Hi Marek, > > You should use the latest me_cleaner. The 96 KiB ME actually works, > but just costs about 3~5 minutes to training the memory controller > and write MRC cache during the first boot after flashing, and costs > less than one second during later boots. > > The only ME modules needed left should be BUP nad ROMP, all other > modules are free to cleanse. > > Try again, please, for your own freedom and security, and report your > results on https://github.com/corna/me_cleaner/issues/3 > > Persmule. > > 在 2017年04月15日 20:13, Marek Behun 写道: > > I have just now managed to flash my X230 with ME truncated to 828 > > KiB. I used an older version of me_cleaner (commit d1abbca2). This > > is because the current version of me_cleaner (which truncates ME to > > 96 KiB) does not work for me (X230 won't boot). > > > > The currently active modules in my ME are (listed with unhuffme): > > BUP CLS ClsPriv FTCS HOSTCOMM KERNEL POLICY ROMP RSA SESSMGR TDT > > UPDATE > > > > Note that originally ME contained all this modules: > > admin_cm BOP BUP CLS ClsPriv CONF_STACK eac FTCS HOSTCOMM ICC JOM > > KERNEL krb LOCL_GER MPC NET_SERVICES NET_STACK NFC Pavp PLDM > > POLICY ROMP RSA sal secio SESSMGR TDT tls UPDATE utilities > > WCOD_PUMA wlan > > > > So the remove modules are: > > admin_cm BUP CONF_STACK eac ICC JOM krb LOCL_GER MPC NET_SERVICES > > NET_STACK NFC Pavp PLDM sal secio tls utilities WCOD_PUMA wlan > > > > I do not know what all can the modules that I left there do, but my > > e1000e is working. > > > > The current layout of the flash is: > > > > 00000000:00000fff fd > > 000d2000:00bfffff bios > > 00003000:000d1fff me > > 00001000:00002fff gbe > > > > This left me with 10.85 MiB for the payload. > > > > I am attaching my current descriptor.bin and me.bin, if someone > > wants to try. > > > > Marek > > > > -- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
