Thanks Youness, the vga works now. On May 24, 2017 8:17 PM, "Youness Alaoui" <[email protected]> wrote:
> Congratulations on getting the ME working again. > Your VGA device is 8086,1616, so that's what you need to set. The > 8086,0406 is probably just the default one in coreboot, but you still > have to configure it. > In 'make menuconfig', go to Devices menu and set the "VGA Device ID" > to "8086,1616", then recompile, and it will work. > I had the exact same issue . Search for "VGA" in this blog post to > read about it (I didn't say much about it other than what I just said) > : https://puri.sm/posts/librem-13-coreboot-report-february-3rd-2017/ > > Good luck, > Youness. > > On Wed, May 24, 2017 at 7:50 PM, Alejandro Flores <[email protected]> > wrote: > > Now that my ME problem is solved I turn to another problem. > > > > The video bios does not seem to function. During seabios boot screen no > > video is displayed. Only when grub auto loads does the video start. > > > > When I use cbfstool auron_yuna.bin print > > it shows pci8086,0406.rom at offset 0x7004c0 > > > > However when I check lspci -n it shows an address of 8086:1616 for pci > > device 00.02.0 VGA compatible controller. > > > > Which of these should I use for coreboot VGA device PCI ID? > > > > -- > > coreboot mailing list: [email protected] > > https://mail.coreboot.org/mailman/listinfo/coreboot >
-- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
