Hi Zoran / Mariusz, Below, I have provided the contents of my /etc/default/grub,
GRUB_TIMEOUT=-1 GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" GRUB_DEFAULT=saved #GRUB_DISABLE_SUBMENU=true GRUB_SAVEDEFAULT=false GRUB_TERMINAL="serial console" GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=1 --word=8 --parity=no --stop=1" GRUB_CMDLINE_LINUX="console=tty1 console=ttyS1,115200 vconsole.font=latarcyrheb-sun16 $([ -x /usr/sbin/rhcrashkernel-param ] && /usr/sbin/rhcr" #GRUB_DISABLE_RECOVERY="true" GRUB_FORCE_HIDDEN_MENU="false" #GRUB_HIDDEN_TIMEOUT = 0 Thanks, Dhanasekar On Thu, Jun 8, 2017 at 3:51 AM, Zoran Stojsavljevic < [email protected]> wrote: > Hello Mariusz, > > > Try adding below lines on top of your grub.cfg: > > Are you talking about this file: /etc/default/grub ? > > This is what I have on my Fedora 26 VM (CLI transcript follows): > > *[root@localhost grub.d]# cd /etc/default* > *[root@localhost default]# ls -al* > *total 28* > *drwxr-xr-x. 2 root root 4096 Jun 7 06:24 .* > *drwxr-xr-x. 160 root root 12288 Jun 7 23:52 ..* > *-rw-rw-r--. 1 root root 262 May 14 19:54 grub* > *-rw-r--r--. 1 root root 1756 Jun 5 16:10 nss* > *-rw-r--r--. 1 root root 119 Feb 12 01:42 useradd* > *[root@localhost default]# cat grub* > *GRUB_TIMEOUT=5* > *GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"* > *GRUB_DEFAULT=saved* > *GRUB_DISABLE_SUBMENU=true* > *GRUB_TERMINAL_OUTPUT="console"* > *GRUB_CMDLINE_LINUX="rd.lvm.lv <http://rd.lvm.lv>=fedora/root rd.lvm.lv > <http://rd.lvm.lv>=fedora/swap rhgb quiet"* > *GRUB_DISABLE_RECOVERY="true"* > *[root@localhost default]# pwd* > */etc/default* > > In such a case, which is, I think, one Politically Correct, the following > must be done: > [1] Whenever I modify */etc/defualt/grub*, I run *grub2-mkconfig -o > /boot/grub2/grub.cfg* ; > [2] Rebuild Coreboot! > > Hello Dhanasekar, > > What is the content of your */etc/default/grub ?* > > Should be the following (or similar): > > *GRUB_TIMEOUT=5* > *GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"* > *GRUB_DEFAULT=saved* > *GRUB_TERMINAL="serial"* > *GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=1 --word=8 --parity=no > --stop=1"* > *GRUB_TERMINAL_INPUT="serial"* > *GRUB_TERMINAL_OUTPUT="serial"* > *GRUB_CMDLINE_LINUX="rd.lvm.lv <http://rd.lvm.lv>=fedora/root rd.lvm.lv > <http://rd.lvm.lv>=fedora/swap"* > *GRUB_DISABLE_RECOVERY="true"* > > Zoran > > On Wed, Jun 7, 2017 at 5:36 PM, Mariusz via coreboot < > [email protected]> wrote: > >> Hi Dhanasekar, >> >> Try adding below lines on top of your grub.cfg: >> >> serial --unit=1 --speed=115200 --word=8 --parity=no --stop=1 >> terminal_input serial >> terminal_output serial >> >> Then rebuild coreboot and try. >> Or try with grub.cfg containing only above three lines (you should get >> working grub shell) >> >> Mariusz >> >> >> W dniu 07.06.2017 o 15:38, Dhanasekar Jaganathan pisze: >> >>> Hi Nico, >>> >>> Following is my complete Payload setting, >>> >>> 1.Add a payload -> (GRUB2) >>> 2.GRUB2 version -> (HEAD) >>> 3.Include GRUB2 runtime config file into ROM image = Y >>> 4.Gave the path of grub.cfg (which I copied from Fedora OS when booted >>> is booted with other BIOS vendor). >>> >>> Based on this, please provide your comments. >>> >>> Thanks, >>> Dhanasekar >>> >> >> >> -- >> coreboot mailing list: [email protected] >> https://mail.coreboot.org/mailman/listinfo/coreboot >> > >
-- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
