Dear Naresh, Thanks a lot for your advice. I'm finding correct blobs for KBL U. I'll update once I get result.
2018-01-07 22:05 GMT+07:00 Naresh G. Solanki <[email protected]> : > Hi Toan Le, > > For Sasby Island, which is based on KBL U, you'll need corresponding > blobs(me descriptor & ucode). > Use kblrvp7 as starting point. And based on schematic(of Sasby Island) & > your requirement(interface/device), you may have change settings(like gpio, > devicetree.cb etc). > > Make sure you are using right config & blobs. For this you can get in > touch with Intel FAE. > > Regards, > Naresh G Solanki > > > On Jan 6, 2018 7:45 AM, "Toan Le manh" <[email protected]> wrote: > > Hi Naresh, > > Thanks a lot for your reply. > Could you please advise which settings should be modified for sasby island? > > Thanks. > > > 2018-01-06 2:33 GMT+07:00 Naresh G. Solanki <[email protected] > >: > >> I guess you have coreboot working on rvp11. >> >> You may have to modify few settings based on sasby island. >> >> >> >> On Jan 4, 2018 7:58 AM, "Toan Le manh" <[email protected]> wrote: >> >>> Hi, >>> >>> I had a Intel Sasby Island kit, which has CPU family: SkyLake, model >>> i7-6600U, Memory: LPDDR4. >>> Do you think coreboot for Intel rvp11 (Kabylake U, LPDDR4) can work on >>> that Sasby Island kit? >>> >>> Thanks & BRs, >>> Toan Le >>> >>> -- >>> coreboot mailing list: [email protected] >>> https://mail.coreboot.org/mailman/listinfo/coreboot >>> >> > >
-- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
