On Tue, 23 Jan 2018 21:02:02 +0800 戴，曉政 via coreboot <[email protected]> wrote:
> Dear Taiidan, > > I just want to install and simply compile correboot at the current > stage because I am a junior develop of coreboot. I will buy a ASUS > KGPE-D16 mainboard from auction website after I restore my > development environment. Thank you for your response. I have two > question finally. > 1. Does BIOS rom of KGPE-D16 be removable? The BIOS (SPI) flash chip on the KGPE-D16 is socketed, so yes it is removable. If you plan to swap it, I highly recommend a dedicated DIP extractor for it! Something like this: https://lut.im/K9hQJgJbKk/gR8wUUwDwd7pjBMu.JPG > 2. Does architecture of KGPE-D16 be pre-PSP or not? Yes, it is pre-PSP. Good luck! > > > > > Dear Taiidan, > > > > I have read letter from Kyosti, he said ?AGESA family15 boards and > > chipset vendorcode for older than Trinity has been/will be removed > > on 4.7 release?. In this case, whether I still can >use H8SCM for > > my first coreboot mainboard or not? > >If you want to port coreboot it is a good board, to have as a > >functional device no. > > And I will try to port KGPE-D16 after I complete porting of H8SCM > > with coreboot. In addition, I apologize again for my poor English. > >Porting is creating the code base for a motherboard. > >Installing coreboot is simply compiling and installing, I am not > >sure which you want? The H8SCM needs a port whereas the KGPE-D16 is > >fully functional and a great example of coreboot ports. > > > > --- > Avast 防毒軟體已檢查此封電子郵件的病毒。 > https://www.avast.com/antivirus -- Merlin Büge <[email protected]> -- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
