Hello Zvika, Add your device in Konfig and configure it under devicetree. Look for examples and/or previous threads in this mail list.
Jose. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Monday, October 8, 2018 12:02 AM, Zvi Vered <[email protected]> wrote: > Hello, > > I have to port coreboot to a "Bay Trail" board (KONTRON). > I selected "Bayley Bay FSP-based CRB" as a reference. > > In my board, the output of superiotool is: > Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x41) at 0x2e > > But the configuration of the reference board is: > *** Super I/O *** > > How can I change it ? > > I wish there was a basic configuration that could be easily modified. > > Thank you, > Zvika > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ > > coreboot mailing list: [email protected] > https://mail.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
